Snug Cottage Hardware Heavy Duty Double Strap Hinges for 3" Thick Wood Gates - Straight Eye, Each

Straight Eye Double Straps (8322)

Our Straight Eye Double Straps are an excellent option for when you want a central mount but wish to minimize the space between the gate and the post. They are used in a similar fashion to the Central Eye Double Straps (#8312). However, with the eye position offset of center, they will allow you to reduce the space between the gate and the post to as little as 2” and still allow your gate to open to 90 degrees.

Double Straps not only hang the gate, they strengthen and support the gate. By sandwiching the lumber between the straps the corner of the gate is effectively locked at 90 degrees to prevent sagging and distortion. Ideal for Heavy Gates such as Double Drive Gates, Ranch Gates, Heavy Picket Gates, and Dumpster Enclosures.

This hardware is ideal for use with wood gates.

• Extremely heavy duty!
• Intended for use on large, heavy gates constructed using wood or cellular PVC.
• Available in 5" and 24" lengths.
• Straps are 2" wide x 1/4" thick.
• 3" space between straps.
• 3/4" eye to fit our 3/4" pin selection. (Sold Separately)
• Sold individually.
• Manufactured from forged steel.
• Available in Hot Dipped Galvanized or Black (BPPCG) finishes.
• Color matched carriage bolts included.
• Double Straps Sandwich the Wood Between the Straps to Lock the Gate at 90 Degrees to Prevent Sagging and Distortion.
• The "Straight Eye" Double Strap reduces the space between the Gate and the Post while setting the Gate back from the front of the Posts. Gate can be opened a full 180 Degrees to be completely out of the way when open.
• A Long Double Strap is Usually Used on the Top Rail of the Gate (24" For Gates up to 10' Wide).
• The 5" Double Strap can be Used on the Bottom of All Sizes of Gates (We also offer the Adjustable Bottom Fitting (#8250) which allows for Easy Adjustment).
• Gates Over Six Feet High Should Have a Third Hinge.
• 3" Between Straps Accommodates Two Pieces of 2x6 Lumber or Two Thicknesses of 5/4 Decking or 1" Rough Cut Lumber.
• We also offer these hinges in a Central Eye (#8312) and Rear Eye (#8324)configuration.
• We also carry Heavy Duty Single Strap Hinges (#8307).