Jerith Legacy #200 Aluminum Rainbow Double Gate

Item # JX-200-RG

Actual product(s) may vary from pictures shown

Details

These Gates match Jerith Legacy #200 Fence Sections.

Double Swing Gate with a continuous arch
Pinched point pickets between top rails
Available in 3', 4', 5' and 6' heights
All gates have three rails except for 6' heights have 4 rails
Actual height of gates are 1/2" shorter than listed, measured to the top rail or picket/finial where applicable
Height shown is for the lowest part of the arch
Gate will arch 4" to 6" depending on the width of the gate
Posts are sold separately
Use gate posts on both sides of gates
Order Gate End Posts if matching fence sections will be attached to the posts, order Gate Blank Posts if gate will be free-standing.
4" square posts recommended for gates over 24 square feet in size, especially when a gate operator is to be used
No braces, all pickets welded to rails for added strength
Double Swing Gates are preassembled
Made from Jerith's Exclusive HS-35 Aluminum Alloy - strong as steel without the rust!
Powder Coat Finish with FencCoat™ for an everlasting beautiful fence
Available in Black, White, and Bronze
Limited Lifetime Warranty for simple peace of mind
Made in the USA

Shop Jerith Accessories - Accessories are Field Installed.

Shop this Collection - Jerith Legacy #200

Ordering Notes:

Jerith aluminum swing gates do not include hinges and a latch. Please shop Ornamental Gate Hardware for options that will work with your gate.

Specifications

Specifications
Gates Include Hardware:	No
Paint:	Powder-Coat - Lifetime Warranty
Available Colors:	Black, White, and Bronze
Available heights:	3', 4', 5' and 6'
Picket Spacing:	3-13/16"
Picket size:	5/8" sq.
Rail Size:	1"H x 1-1/2"W

Jerith Residential Rainbow Gates - Specifications

Jerith Residential Rainbow Gates - Specifications
Jerith Style #101 pictured

A	Pinched Picket Top - styles also available with finials or flat tops
B	Rails - 1"H x 1-1/2"W - Rails wider than residential styles for added strength, still has same front appearance as fence sections. Top rails arch 4"- 6" depending on style and width of gate - 6' heights have 4 rails, 2 rails at bottom
C	Pickets are welded to inside of rails for added strength - adds to overall appearance by eliminating cross rails needed on most gates to add structural strength
D	Self-closing latch - magnetic gate latch
E	Picket spacing - 3-13/16" spacing between pickets, matches spacing on fence sections (1-5/8" for styles #401 & #402)
F	Pickets - 5/8" square, matches pickets on fence sections
G	Gate uprights - 1-5/8" square
H	Self-closing hinges included with all Rainbow Gates
I	Gate Posts - 2" square - purchased separately, see matching Jerith Residential fence section

Reviews

There are no reviews yet. Be the first to Write a Review (requires login).

Shipping

Country

State

Zip/Postal

Ships via less than truckload common carrier. Free Shipping Incentive for Jerith Aluminum Fence: Jerith Free Shipping

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.