Shop: Jerith Aluminum Fence Accessories | Jerith Aluminum Fence
More Information: Ornamental Fence System Overview
Jerith Aluminum fence products are guaranteed for life against defects in workmanship and/or materials and will never rust. Jerith components are extruded from an aluminum alloy and the residential styles are assembled with a screwless design that is attractive from both sides of the fence. Industrial styles still use stainless steel screws with painted heads to match the fence finish. Accessories are fully powder coated to match the fence color. The FenceCoat™ powder coated finish on all fencing by Jerith Aluminum is unconditionally guaranteed against peeling, cracking , chipping or blistering for as long as you own your fence.
WALL MOUNT - STATIONARY - These brackets are used to mount the rails to a flat surface such as an unrouted post, a wall, or a column. Used for 90° connections. Requires one for each rail mounting to surface.
WALL MOUNT - ADJUSTABLE - These brackets are used to mount rails to a flat surface at an angle other than 90°. Requires one for each rail mounting to surface.
DECK MOUNT CASTING - Deck mount castings can be used to mount posts to a flat surface such as concrete or decks. Posts with welded plates are also available to simplify installation when mounting to flat surfaces.
DECORATIVE SCROLLS - Scrolls are available in four colors including gold. Scrolls fit on top of rails, between pickets and top rails, and between pickets under top rails. Gives your fence or gate a unique look.
BALLCAPS - Ballcaps can be installed on posts when the standard flat cap isn't being used.
FINIALS - Finials come in three styles. Shown from left to right is the Imperial finial, Victorian finial, and Majestic finial. Finials come in black, green, white, bronze or gold as shown here. Finials are available for Residential styles #111, #211, Concord #111, and Symphony. Other Jerith styles with finials include the Premier #111 and Industrial #111 styles.
GATE OPERATOR BRACKETS - Operator Brackets are used to mount a gate operator to your Jerith Ornamental Gate. One set required per gate leaf to be automated. Finish matches factory finish on fence.
TOUCH-UP SPRAY PAINT - Scratches and marred surfaces can be touched up with spray can paint (4.5 oz.) or brush on paint (0.6 oz.).
FLAT POST CAPS - Flat Caps come standard with all posts. They can be replaced with Ballcaps if desired.
RAILS & POSTS - Jerith rails are inserted into pre-routed holes in the post and are secured with supplied stainless steel screws.
PINCHED POINT PICKETS - Pinched points come standard on most Jerith fence pickets. The exception would be styles that have finials. Pickets come preassembled with an attractive screwless design where the picket fastens to the rails.
DECORATIVE RINGS - Rings are installed at the factory. They are available on Jerith arched walk gates, positioned at the bottom of the gate.