Linear 1/2 HP 115V Residential Swing Gate w/Battery Backup

Item # SWD-211

Actual product(s) may vary from pictures shown

Details

Linear Gate Operator Overview

Linear Model SWD Swing Gate Operator with Battery Backup - Medium Duty Residential Rated

Order 1 operator for single gates and 2 operators if you have a double gate application.

Features:

Durable, weather-resistant, UV-stabilized polyethylene one-piece cover.
Removable and lockable steel access door.
Cabinet available in black only.
Pad mounting standard.
Optional post mounting kit available.
Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes.
APeX controller includes integrated radio receiver, plug-in loop detector capability, surge protection, and easy to read labeling standard.
Solid state circuit board, 24 VDC.
LED diagnostic display for ease of setup and troubleshooting.
Inherent current sensing system.
Built in maximum run timer and auto close timer.
Right-hand/left-hand easy conversion.
Master/Slave - simple three-wire connection.
Entrapment alarm.
UL325/UL991 compliant.
Continuous tone entrapment alarm.
Warning beeper to sound when gate is moving.
Pre-start audio/visual outputs included.
The SWD is backed by a manufacturer's 5-year warranty.

Specifications

Linear SWD Specifications (PDF)

HP	Max. Gate Width	Max. Gate Weight	Opening Speed	Shipping Weight	Max. Cycles
1/2	18'	700 lbs.	11-14 seconds	145 lbs.	30/Hour

Specifications:

Heavy-duty, zinc plated, steel chassis.
Right-angle gear reducer.
One-inch diameter output shaft.
Optional adjustable torque limiter available.
Heavy-duty pillow block bearings.
Dual Batteries charged by 115 VAC or optional solar panels.
Charging circuit monitors and maintains battery levels , monitors AC presence, switches to batteries if AC power is lost and automatically resumes AC operation when AC power is restored.
Field-selectable power loss options:

Option 1: Fail Safe (opens the gate and shuts down until AC power is restored).
Option 2: Fail Secure (continues to cycle gate in normal operation until batteries run down and then fails safe/opens the gate. Resumes normal operation when AC power is restored or when solar panels have sufficiently charged batteries).

24 VDC permanent magnet motor.
115 VAC supply converted to 24 VDC for motor and controls.
Power on/off switch.
Emergency stop/reset button on front cover.
Three-button control station included.
Accessory connections are 24-volt AC.
Easily adjustable cam limit switches.
Fully compatible with our entire line of Gate Operator Accessories including card control, loop detectors, radio controls, and automatic closing devices.
Low voltage surge suppressor included.

Instructions

Linear SWD Series Installation Manual (PDF)

Reviews

There are no reviews yet. Be first to Write a Review (requires login).

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.