Securitron Momentary Single Push Button (non-illuminated), Gang Mounted

The model PB-2E is a spring loaded momentary 2" square, exit button mounted on a stainless steel single gang outlet box cover. The SPDT contacts switch when the button is depressed and return when it is released. The contacts are UL listed with 10 AMP capacity.

The PB-2E can be used for momentary release of fail safe or fail secure electric locks. It may also be used to input a REX (request to exit) signal to a card reader system. We recommend that the local building or fire safety authority be consulted prior to using exit buttons for door egress. They may require a "no special knowledge" exit device.

The PB-2E is an economy version, it is supplied without back box and without hookup wire. Connection is made via .250" quick connect terminals found on the rear of the unit. To connect these terminals, the installer may use push on connectors to which wires are crimped or wires may be directly soldered to the terminals through the hole provided. This exit button works great with low voltage systems and will work well with solar panel systems also.