1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

High Tensile Index

High Tensile Index

Centaur HTP®  5" Rail
Hot-Rail® HTP®  5" Rail
PolyPlus® HTP®  5/16" Wire
White Lightning®  5/16" Wire

More Information:
Choosing Components
Components Pricing/Ordering


Centaur and Hot-Rail
PDF (3.1mb)

Single Strand Wire
PDF (154kb)

Member of the American Fence Association

Hot Rail HTP® Electric Horse Fence System

Hot Rail HTP Electric Fence System - Click to enlarge!Designed for Animal Safety & Security...
® Electric HTP® Rail is an innovative fencing product that combines the patented Centaur HTP® technology with electric fencing properties, significantly reducing installation time. This 5" rail is available in three colors designed to blend or contrast with your farm's color schemes. Its five-inch polymer "rail" with three 12-1/2 ga. imbedded high tensile wires is designed with an impressive minimum break strength of 4,400 lbs. per fence rail and features the ability to flex back into place after impact reducing the chances of injury to animals and damage to fence. Hot-Rail® Electric HTP® Rail is unique since it is installed in a continuous loop and attached to posts with a patented "Belt Loop" Bracketing System. This attachment method has two strong advantages over alternative methods: the continuous loop system is more flexible than rigid individual rails of 8, 10, or 12 feet; the Belt Loop Brackets also allow the rails to slip freely, absorbing and dissipating any impact down the entire length of fence.

Designed for Low Maintenance and Longevity...
Hot-Rail® is virtually maintenance-free. Hot-Rail® will retain its beautiful appearance for many years and will not rust, warp, rot, peel, chip, stretch, fade, shatter, or splinter, a fact confirmed by both a QUV tester (an accelerated weatherometer that mimics a lifetime of wear in a short time) and by thousands of installations. These features make Centaur HTP® an economical alternative to vinyl post and rail fence which boasts the same benefits at a higher cost. Centaur HTP® is also an obvious choice for fence when compared with wood board, split rail, and other farm and field type fences. Hot-Rail™ carries a 30 year limited warranty against cracking, rotting, peeling, fading, and loss of conductive properties. As with most of the products we carry, the life of the product will outlive the warranty.

Designed with Options and for Easy Installation... 
is available in white, black, and brown with matching brackets. Rolls are available in 660' and 330' lengths. You may mix and match rails, i.e. Hot-Rail® 5" rails for top rail with PolyPlus® HTP® as bottom rails. Installation is easy enough, most customers choose to install it themselves. Rails are installed continuously around fence area and tighten using insulated barrel tensioners. Rails are connected to posts with a bracket allowing rails to slide and 'give' for the entire fence length. All components are sold separately. Not all components and optional accessories are shown below, please read installation manual to see which items will be needed for your particular installation.

Click Here For Pricing and Ordering

Centaur Bracket - Rail slips through to make a continuous belt dispersing impacts. Bracket Tensioner - Available as a one or two way system to adjust the tension on the rails. Hot Rail Termination Bracket - Terminates Hot Rail fencing the quick and easy way.
Centaur® Bracket - The "belt-loop" bracketing system allows the rail to slip through, dispersing impact. Special brackets have a steel core for added strength and durability. Available in white, black or brown. Barrel Tensioners - Centaur’s barrel tensioners constructed of heavy-duty steel make installation faster and easier. Available in one-way for short runs and two-way for long runs. Available in white, black or brown. Hot Rail® Termination Bracket - Terminates Hot Rail® fencing the quiick and easy way. For Hot Rail® only. Available in white, black or brown.
Inside Rail Roller - New system to allow even tensioning for greater safety. Diagonal Brace Plate - Economical way to make a secure connection with post and brace post. Line Tap Connector - Used to make electrical connections eliminating power losses from bad connections.
Inside Corner Roller - Allows rail to run inside most corners smoothly and securely for easy, even tensioning. Minimizes horses’ access to corner bracing - less chance for cribbing. Diagonal Brace Plate - Makes a secure connection between brace and post without notching. Allows for solid, long-lasting braces. Line-Tap Connector - Slotted bolt type connector used to make electrical connections. Eliminates power losses from poor connections. One tap can be used to make multiple wire connections.
Insulator Pad - Isolates Hot-Rail from grounding out when used with barrel tensioners. Undergate Cable - Used to run power from energizer to fence or to bury under gates. Fence Alert - Visually alerts by flashing when power is lost to electric fence.
Insulator Pad - Used to insulate the barrel tensioners when used with Hot-Rail®. Each 6" x 4" pad can be cut to size during installation. Available in black. Undergate Cable - Use to carry power from the energizer to fence or bury under gates. Specially designed polymer coating protects against voltage leakage in extreme conditions. Fence Alert - Can be seen up to a mile away. Flashes if low voltage power loss. Robust, impact and water resistant case works on any type of electric fence. Replaceable battery lasts up to 5 years.

See installation manual for more information on components and accessories