Safety Edges

Read More: Sensing Edge Overview

Safety Edges provide entrapment protection on automated gates and doors. Sensing Edges are touch-sensitive and will stop and/or reverse the gate opener when contact is made.

Gate Operators manufactured post-January 2016 will typically use a Monitored Sensing Edge, which detects fault conditions in the Edge. DoorKing and Linear/GTO Gate Operators use a 10k Resistive Monitoring Method. LiftMaster Gate Operators use a proprietary monitoring method, so only LiftMaster Sensing Edges should be used with Liftmaster Gate Operators. Non-monitored Sensing Edges are typically used with Gate Operators manufactured pre-January 2016.

Miller Edge Sensing Edges are the most positive emergency stopping device available for motor-driven doors and gates. Miller Edge Sensing Edges should be specified on all power-operated doors and gates. Our wide variety of styles allows for easy installation on nearly any door or gate. From aircraft hangar doors to countertop grilles, and from slide to swing gates; Miller Edge has the Sensing Edge for your application.

The Miller Edge MG110 Sensing Edge Kit is recommended for most Sliding Gates.

The Miller Edge MG020 Sensing Edge is recommended for most Swing Gates.

The LiftMaster Sensing Edge is recommended for use with LiftMaster Gate Openers.