Vinyl Fence Calculator

Step 1:

Enter footage for each stretch. Fractions will not be calculated.

Step 2:

Enter Corner Posts. These posts have two panels attached to it forming a 90 degree angle. Include posts that create an angle nearer 90 degrees than 180 degrees.

Number of Corner Posts

Enter Gate End Posts. These posts are either latch or hinge posts as illustrated. Also they serve as end posts because a panel must also attach to it. Do not include a gate post if it is free standing without a panel attached to it.

Number of Gate End Posts

Step 3:

Enter End Posts. These posts terminate a line of fence. Only one panel is attached to an end post.

Number of Ends Posts

Enter Free Standing Gate Blank Posts. 'AA' illustrates a free standing gate blank post. These posts are a gate hinge or latch post, but do not have a panel attached to them. In this example you could latch to the house in which case, you do not need a post. We recommend a post in most cases. We do not recommend using one of these posts as a hinge post, because sagging of the gate due to a leaning post is more likely. Try to rearrange your layout to avoid that.

Number of Gate Blank Posts

Step 4:

Enter Walk Gates (Single Swing Gates). Gate 1 is a single swing gate. Enter the quantity.

Enter Drive Gates (Double Swing Gates). Gate 2 is a double swing gate. Enter the quantity.

Step 5:

Choose a Fence Style. Pick a Bufftech Vinyl Fence Style from the list. Bufftech Fence Sections
Note: Not all Styles are supported by this calculator, please Contact Us for a custom quote of other styles.