Chain Link Fence Calculator

Category: Chain Link Fence

This form can calculate the entire list of materials needed to construct a residential style chain link fence (except concrete) and total price. Simply follow the six steps on this page. Important Notes

1.Stretches (in feet)

A stretch is defined as an individual straight line of fence unbroken by gates or other end posts. All entries must be in feet (no fractions). Any place where the fence changes direction ends one stretch and starts another. A gate placed in a stretch actually creates two separate stretches (except on either extreme end of a line of fence). Chain link is 'stretched' from end post to end post (gate posts or corner posts serve as end posts for this purpose). The most common mistake is to ignore the fact that a gate, if positioned within one line of fence, creates two individual stretches, one on each side of the gate. This fact will affect the quantity of line posts that are needed on each side as well as the number of fittings to connect the chain link to terminal posts. A terminal post is normally a larger diameter than the line posts. They are also called end, corner, and gates posts.

Stretch 01    Stretch 05    Stretch 09    Stretch 13    Stretch 17
Stretch 02    Stretch 06    Stretch 10    Stretch 14    Stretch 18
Stretch 03    Stretch 07    Stretch 11    Stretch 15    Stretch 19
Stretch 04    Stretch 08    Stretch 12    Stretch 16    Stretch 20

Include bottom tension wire

2. # of Terminal posts

Number of end, corner and gate posts

(Do not figure intermediate or line posts...we will - 10' apart)

3. Gates

Single Walk Gates:

3 feet wide

4 feet wide

5 feet wide

Double Drive Gates:

10 feet wide

12 feet wide

4. Height of the fence

feet

Chain Link Fence Calculator

1.Stretches (in feet)

2. # of Terminal posts

3. Gates

4. Height of the fence

5. Gauge of chain link

6. Grade & Finish of Framework