Hoover Fence Commercial Chain Link Fence Single Gates, All 1-5/8" Galvanized HF20 Frame
Item # CL-SNG-GATE-COM
Details
Details
Our Commercial Chain Link Single Swing Gates feature a welded 1-5/8" HF20 galvanized gate frame streched with 9 ga. galvanized fabric. The corners are notched and welded for a strong and aesthetic finish. We then clean and paint the welded joints with a zinc-rich welders paint. The chain link fabric is attached to the gate uprights with tension bars and tension bands, and aluminum tie wires attach the fabric at all horizontal rail connections. Our gates ship assembled, and do not include hardware.
We also offer double gates, and gate with barbed wire. Custom built sizes and configurations by special request. Please contact a sales representative for all custom requests.
Ordering Notes:
Our gates are built to fit the opening size shown, the space in-between the hinge posts or the hinge and latch post. Gates are also built approximately 2" shorter than the heights shown to allow space under the gate for it to swing. We can build to 'finish size' by request. Custom built sizes and configurations by special request. Please contact a sales representative for all custom requests.
Gates that are over 5'H will have a horizontal brace bar. Gates that are over 7'W will have a vertical brace bar. If both dimensions are exceeded, then gates will have plus bracing (one horizontal bar and one vertical bar).
1-5/8" Gate Post Caps are sold separately. Chain Link Gate Post Caps
Specifications
Specifications
Actual Single gate widths are approx. 4" less than the width shown. This allows space for our standard hinges and fork latch (not included).
Example: a 4' (48") wide gate actually measures approximately 44" wide.
If you are using your hinges, set the posts after the gate arrives by pre-mounting the hinges and latch to guarantee a proper fit. This is always a good idea anyway. TIP: Set the gate hinge post first, install the gate complete with latch and set the latch post last. This GUARANTEES a good fit. We can custom build to fit your opening between posts, or other fixed structures, i.e. walls, and/or columns.
If you are replacing an existing gate, you must measure the gate opening size and make sure gate posts are plumb. Measure across the opening at a height where you intend to mount the latch. Provide us with the 'inside-to-inside' measurement. Provide us with the gate opening size and we will make the gate fit using our hinges and latch. It would also be wise to measure the actual height of the gate, in the case that our standard 2 inch space under the gate does not meet your needs. Please provide a drawing with all pertinent measurements at the time of your order.
Customer Photos
Customer Photos
Reviews
Reviews
Average Customer Rating:
(1 Review)
Write a Review (requires login)
Everything was so smooth
Everything was so smooth, right down to the delivery, great guy!
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
-
$27.80 - $30.89180 Degree Adapter for Box/Butt Hinges and Bulldog Hinges (H-0561)#CL-ADAPT-2View More
