GTO Master Pin Lock

GTO Master Pin Lock (FM345)

The Linear/GTO PRO-SW1500/2000/2500/3000/4000* Swing Gate Opener arms secure with a clevis pin at each end of the operator arm; one on the gate, the other on the post. Anyone can remove those pins and walk off with the operator arm. To avoid such a nasty loss, purchase one RB345 lock for each operator arm. That way they can not steal the arm and yet you can unlock and remove the lock to get the gate open in case of failure of the operator. Pin Locks are recommended on front mount only. The same lock can also be used with all Mighty Mule gate operators.

The RB345 master pin lock may also be used with the SL1000B and SL2000B slide gate operators. This would fit above in the bracket that attaches the chain to the gate to lock the chain on. The 'quick release' would no longer be 'quick release'. The master pin locks would lock the chain on so that anyone without a key could not get in. Typically two per operator would be needed.

* Master Pin Lock shown can only be used on the front mount with the PRO-SW3000XL(S) and PRO-SW4000XL(S) series operators with the large square post pivot brackets.