Linear Photo Beams

Item # R4222

Actual product(s) may vary from pictures shown

Details

Linear Photo Beams (R4222)

Linear Photo Beams are used as a primary safety device in providing a “non-contact” means of entrapment protection. The Photoelectric Dual Beam Detector uses dual beam and through-beam technology to reduce false detections when detecting obstructions. When the beams detect the presence of a moving object, the detection will cause the gate(s) to stop and reverse to the fully open position. As long as the beam is obstructed the gate(s) will remain open. Not compatible with solar powered gate operators.

Features:

Photoelectric Dual Beam Detector
Maximum range of 98 to 295 ft (outdoor/indoor)
Can be mounted to a wall or a post
Measures 6.75" x 3.25" x 3"
Requires low voltage wire (RB509)
Includes: Transmitter, Receiver and Mounting Hardware

Specifications

Specifications
Detection Method	Infrared photoelectric
Range	Outdoor 98.4 ft, Indoor 295.2 ft
Beam Characteristics	Pulsed infrared dual beams
Response Time	50~700msec (selectable)
Power Input	DC13.8~24V / AC11~18V>
Current Consumption	40mA max
Output Pulse Duration	2Sec (+/-1) nominal
Alarm Output	Form C relay (AC/DC 30V 0.5A max)
Tamper Switch	N.C. Opens when cover is removed (receiver only)
Operating Temperature	-13°F (-25°C) ~ 131°F (55°C)
Environment Humidity	95% max
Alignment Angle	+/-5° vertical, +/-90° horizontal
Mounting	Wall or pole
Weight	.66lbs (300g) Both transmitter and receiver
Appearance	PC Resin (Black)

Instructions

R4222 - Installation Manual (PDF)

Reviews

There are no reviews yet. Be the first to Write a Review (requires login).

Shipping

Country

State

Zip/Postal

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.