GTO Push to Open Bracket for PRO4000XL(S) Swing Gate Operators

GTO Push to Open Bracket for PRO4000XL (R4KPTO)

R4KPTO push to open bracket for GTO PRO4000XL swing gate operators with HBP4XL Hardware Upgrade that require an optional bracket for push to open applications. This bracket is also used with the GTO PRO4000XLS which comes standard with the HBP4XL hardware (also used with standard hardware for PRO4000XL made before 5/2010).

Allows conversion of the standard pull to open application to a push to open on GTO swing gate operators. Pull to open means the gate will swing towards the side the arm is attached. That normally is on the inside of the gate, although operators can be installed on either side that allows the gate to swing clearly. Push to open is the opposite. The gate would swing in the direction away from the side that the operator is mounted. One bracket is required for each actuator arm. Two are required for a double swing gate that has two actuator arms. These brackets replace the standard post pivot brackets that come with the operators.