QUIK-ROK Hydraulic Cement
Item # QUIK-ROK-P
Details
Details
QUIK-ROK® is a chemically engineered hydraulic cement which when mixed with water forms a pourable mix who self-leveling characteristics make it an ideal grouting material. Controlled expansion enables QUIK-ROK® to develop "lock-in" adhesion which can withstand loads in excess of 10,000 psi. It is designed to set within 15 minutes, even in subfreezing temperatures, down to 20° F.
Advantages:
- Pre-mixed
- Fast Set
- Pourable
- Self Leveling
- Exceptional one-hour compressive strength
- Non-shrinking
- Non-metallic
- Non-corrosive
- Inorganic
USES
As a Grout:
- Anchoring form ties for below-grade pours
- Anchoring some iron and aluminum railings - QUIK-ROK® is NOT to be used for balcony or other life safety structures!
- Setting and grouting precast structural columns
- Grouting parking meters, traffic signals, sign posts
- Precision grouting and leveling of heavy machinery
- Grouting of anchor bolts, dowels, etc.
As An Additive:
- Increasing set-time and compressive strength of Portland Cement
- Setting of fence posts
NOTE: Single bucket orders ship UPS. If you are ordering multiple buckets, please not that these require a shipping quote, and/or minimum order of $145.
Specifications
Specifications
PACKAGING
QUIK-ROK® is supplied in 50 lb. pails.
EXTERIOR APPLICATION
Although QUIK-ROK® has excellent freeze-thaw resistance, when used in a "sleeve" designed anchoring system; QUIK-ROK® must be shaped (crowned) to allow for water "run-off" thus eliminating the possibility of freeze-thaw damage. On exterior surfaces, do not allow sleeve to act as water reservoir. Trowel a mound-like head to insure water drain-off. Constant exposure to large amounts of water may cause deterioration.
COVERAGE
One 50 lb. pail of QUIK-ROK® fills approximately 1/2 cubic foot.
Recommended dimensions for grouting balcony railings, anchor bolts, dowels, rods, etc.:
| Diameter of Material | 1/2" | 3/4" | 1" | 1-1/2" | 2" |
|---|---|---|---|---|---|
| Diameter of Hole Needed | 1-1/2" | 1-3/4" | 2" | 1-1/2" | 3" |
| Depth of Hole Needed | 1-1/2" | 2-1/4" | 2-1/2" | 2-3/4" | 5" |
PHYSICAL PROPERTIES
- Color: Gray
- Set Time: 8-12 min.
- Water/Cement Ratio: 0.28
- Expansion: 0.2% maximum
COMPRESSIVE STRENGTH
- One Hour Wet: 4,000 psi
- One Hour Dry: 6,000 psi
- One Hour Frozen: 3,000 psi
- One Day Dry: 9,000 psi
- One Day Frozen: 6,450 psi
- Ultimate: 11,000 psi
APPROVED FOR USE BY
- Florida (Dade County) Building & Zoning Department
- New York State Board of Education
- United States Department of Agriculture
- North Carolina Department of Transportation
- Georgia Department of Transportation
- New Hampshire Dept. of Public Works and Highways
TENSILE PULL-OUT STRENGTH
Steel bolt from QUIK-ROK®: 29,000 lbs. (1/2 in. bolt fractured).
QUIK-ROK® from smooth epoxy coated steel sleeve: 9,223 lbs..
FREEZE-THAW RESISTANCE
Immersed in 4% Sodium Chloride solution and continually cycled within a temperature range of 8°F to 75°F, QUIK-ROK® passed 50 cycles.
Instructions
Instructions
MIXING
Mix clear water with QUIK-ROK® - approximately 1 part water to 2 -1/2 parts QUIK-ROK®, by volume. Stir until smooth, avoiding a watery mix. (Note: Excess water reduces strength, durability and increases set-time, as with any hydraulic cement.) Do not add addition amounts of water as mix begins to set!
Prepare only as much QUIK-ROK® as will be used in ten minutes.
As an additive: Substitute QUIK-ROK® for 15% to 50% of the cement content, mix thoroughly with sand and aggregate before adding water (approximately 5 to 10 gallons per 100 pounds of mix).
Do not add calcium chloride or any other type of concrete accelerator to QUIK-ROK®. Use warm water if a faster set is desired.
For best results a mechanical mixer is strongly advised.
Reviews
Reviews
There are no reviews yet. Be the first to Write a Review (requires login).
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
Parts for this product
