SHUT IT! The BadAss Barrel Hinge

Item # CI3950
Sold Individually
SHUT IT! The BadAss Barrel Hinge
Actual product(s) may vary from pictures shown
$128.97 - $143.30
1 - 9 $143.30 each
10 + $128.97 each

Details

Details

The BadAss Barrel Hinge (CI3950)

The BadAss Barrel Hinge from SHUT IT! Gate Hardware is the strongest and most versatile gate hinge on the market. Ideal for nearly all heavy-duty gate installations, the BadAss Barrel Hinge is sure to be a game changer in the industry. The gate hinge can be installed where a full 180 degree gate opening is required and has the ability to reduce the gap between end post and gate to under 1/2".

The BadAss Barrel Hinges feature high-temperature sealed bearings which not only allow for the smooth operation you would expect from these hinges, but also allows the hinges to be welded, and then powder-coated with your custom swing gate.

    The BadAss Barrel Hinge Features:
  • The BadAss™ Barrel Hinge is the strongest and most versatile gate hinge on the market
  • Four Maintenance Free Sealed Bearing (no greasing)
  • High-temp Bearings, Safe to Powder-Coat
  • Ideal for nearly all flat post installations
  • Limited Lifetime Warranty (5 Years on Bearings)
  • Zinc Plated
  • Load rating per gate: 3,000 lb (1,360kg)
  • Maximum gate weight: 1,500 lb (680kg)
  • Weld-on or Bolt-on Installation
  • Swings 180° if required

Specifications

Specifications

The BadAss Barrel Hinge Specifications

SKU Finish Fixing Gap Variance Bracket Body Height Weight
CI3950 Zinc Bolt-On 3 - 3-1/2" (76-89mm) Steel Steel 4" (102mm) 2.0 lb (1kg)
Product Code CI3950
Gate Application Pedestrian Gate, Driveway Gate - Double, Driveway Gate - Single, Pet Gate, Playground Gate, Public/Commercial Gate, Automated/Electric Gate, Security Gate, Privacy Gate
Gate Type Non Self-Closing
Gate Material Steel/Ornamental Iron
Approx Gate Size 6ft W x 8ft H (1.5m x 2m)
Gate Frame/Post Shape Square-to-Square
Min Post Size 1-1/2"+ (40mm)
Ideal Gate Gap Fixed at 1/2" (13mm)
Fixing Method Bolt-On, Weld-On
Color/Finish Zinc

Warranty

Warranty

Lifetime component replacement guarantee (5 years for bearings).

The BadAss Barrel Hinge Warranty

FAQ

FAQ

Warning: Hinges will be severely damaged if electrical welding current is not properly grounded resulting in the Warranty being voided.

What type of sealed bearings does Shut-It use?
High-temp sealed radial ball bearings. They never need grease or maintenance. Unlike other hinges that require periodic greasing, sand and dirt won’t get inside your Shut-It hinges ensuring long life and superior performance. Our 304 stainless steel hinge model comes with stainless steel sealed bearings.
Does your zinc plating need to be removed before welding?
No. Zinc plating does not need to be ground off or removed in any way before welding. You will find the weld to be clean and without impurities. However, you will need to re-apply appropriate rust and corrosion protection after welding. Zinc makes an excellent undercoat for painting. We do not use a hot-dipped galvanizing process in order to avoid ‘metal fume fever’ or ‘zinc poisoning’ when welding. After 20 years and over 100,000 installations we have not had a single complaint in this regard. Be sure to follow standard welding guidelines and wear appropriate eye, face and body protection when welding.
Can I powder-coat my Shut-It® hinges?
Yes, except for the Self-Closing BadAss Hinge (CI3850). Shut-It® hinges shipped from March 1, 2019 onward use special sealed ballbearings with grease and seals that are specifically formulated to withstand the temperatures encountered in a powder-coating line. Although it is no longer necessary to remove the bearings from the hinges, it is still necessary to shield the bearings and interior surfaces of the hinge from pre-treatment sand blasting and powder-coat particles, as these may cause binding or premature wear. The self-closing hinge (CI3850) cannot be powder-coated due to additional components that will be negatively affected by the powder-coating process.
I want to use your stainless steel hinges for a stainless steel gate, but the fence post will be mild steel. Any suggestions on proper welding techniques?

For welding stainless steel hinges to mild steel gates and posts we recommend using type 309 (23 12L to BS EN 12072) welding rods or wire. This is should help avoid cracking in the weld dilution zone that can be a problem if normal rods or filler are used.

Unprotected welds subject to aggressive environments such as immersion in seawater could result in sacrificial corrosion to the less noble carbon steel part. However, post-weld surface coating repair would normally be needed for the carbon steel to ‘restore’ the corrosion protection.

If this re-coating/painting is allowed to lap over onto the weld bead then the joint should not be at risk to bimetallic corrosion in any environment so long as the coating is sound. Ideally the weld bead should be covered so that only the ‘parent’ stainless steel is exposed. This ensures that galvanic corrosion cells cannot be set up across the joint, where there is a composition ‘gradient.’

What color zinc are your products finished with?
All zinc coatings have an additive called chromate that helps the zinc adhere to the metal’s surface. Chromate comes in the following colors: yellow, black and blue. Shut-It uses blue chromate which actually looks clear, but if you look close enough it has a blue tint. All colors of zinc chromate perform equally.
Does the hinge Load Rating mean it can permanently hold a gate that heavy?
No, a gate’s overall load when opening and closing will vary based on many factors including gate weight, length and height of the gate, wind, people hanging on the gate, etc. You can expect the Load Rating on your hinges to be as much as twice the actual weight of your gate. Shut-It recommends you consult an engineer to assist in calculating your load ratings and there are many internet discussions on this subject that you may find useful.

Reviews

Reviews

Average Customer Rating: 5 out of 5 stars(3 Reviews) Write a Review (requires login)

Friendly and reliable! 5 out of 5 stars

Reviewer: A viewer from California

Friendly and reliable!

Wonderful customer service 5 out of 5 stars

Reviewer: A viewer from New Jersey

Wonderful customer service. Would recommend

Hoover fence co. A++ / ups F- 5 out of 5 stars

Reviewer: A viewer from California

Great product/ knowledgeable people. Delivery was a nightmare tracking didn’t work, then it was lost then it said it would be delivered Saturday and it wasn’t then it said Sunday and it wasn’t. I just got it today. Throughout this whole experience I tried to speak with a real person. Not possible.

Shipping

Shipping

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
You May Also Like
Accepted Payment Methods
Authorize.net Verified Merchant Secured by GeoTrust Better Business Bureau Accredited Business Member of the American Fence Association, Inc. Certified Fence Professional Certified Automated Gate Operator Installer Certified Automated Gate Systems Designer