1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
The ULTRA-PLG vehicle loop detector combines small size with full-featured functionality in a plug-in module.
This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.
The ULT-PLG provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. Our latest vehicle detector provides options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.
This detector is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™. Ten sensitivity settings allow for finer adjustment of the detection level. The four frequency selections help to prevent crosstalk in multi-loop applications.
The ULT-PLG is compatible with a wide variety of gate operators. Please see the SPEC SHEET for a detailed list.
| Sensitivity | 10 levels, 0-9 |
|---|---|
| UltraMETER™ display | Indicates optimum sensitivity level, 0-9 diagnostic aid |
| Loop frequency | 4 settings (low, med-low, med-hi, high) |
| Loop inductance | 20…2000µH (Q factor > 5) |
| Grounded loop | Isolation transformer allows operation with poor quality loops |
| Automatic tuning | Detector tunes to loop on power-up and following frequency count function |
| Environmental tracking | Automatic compensation |
| Surge protection | Loop circuitry protected by surge suppressors |
| Detect output | Solid-state (open collector) |
| Output B | Solid-state (open collector) |
| Output B inverted | Solid-state (open collector) |
| Power / loop fault indicator | Green LED |
| Detect / frequency count indicator | Red LED |
| Detect-on-Stop | Requires vehicle to stop for a minimum of 1 second (1-2s typical) |
| ASB (Automatic Sensitivity Boost) | Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles |
| Power | 12VDC…24VDC |
| Operating current | 15 mA |
| Operating temperature | -40°C…82°C (-40°F…180°F) 0…95% relative humidity |
| Dimensions (L x W x H) | 3.0”(76mm) x 0.9”(22mm) x 2.75”(70mm) |
| Weight | 0.15 lbs. (68 g) |
| Connector | 10-pin female |
There are no reviews yet. Be the first to Write a Review (requires login).
