Long Ranger LR-650-RX-4X
Multi-code Receiver in NEMA 4X Enclosure
The Long Ranger-650 system comprises of a transmitter with fixed code and a receiver that can learn up to 15 different codes. The receiver can learn the codes on a first in first out basis. The 16th code will erase the first code programmed.
Mount the receiver where it is not surrounded by metal. The LR-650-RX-4X is designed for outdoor applications with it's NEMA 4X housing to resist the weather and moisture.
RED= +12-24V, BLACK= -12-24V, GREEN= Common, WHITE= Normally Open, BROWN= Normally Closed.
1. Press mode switch #1 on the receiver for 3 seconds. The green LED will start flashing quickly.
2. While the green LED is flashing, press a button on the transmitter. The green LED will flash once and turn off to confirm that the code was learned. If all the transmitters have the same code there is no need for further programming.
3. Repeat step 1 and 2 if you want to program the receiver with additional codes.
Note regarding code learning
Receiver will learn code only once. After the receiver learned 15 different codes and a new code is programmed the earliest code will be erased.
To clear all codes press the mode switch #1 for 3 seconds, when the LED starts flashing press the mode switch #1 again for 3 seconds. The LED will flash twice indicating that all the codes were deleted.
Programming Receiver Relay Output Modes
|4-second momentary (default)
Toggle Open / Close
Latch to Open until reset by switch #1
Back to EMX Transmitter and Receiver Page