1-800-355-2335 | Mon-Fri: 9am-5pm EST | Contact Us

C:\fencecom\public_html\hooverfence\server-side\gto-left-menu.htm
Return
Gate Operator Index
GTO  Gate Operators
(All 12V DC except where noted)
 
Swing Gates
Slide Gates
More Information
Accessories
Replacement Parts
Product Code: PRO-SW4000XLS
GTO/PRO-SW4000XLS - Click to enlarge!

GTO/PRO Swing Gate Operator

GTO/PRO-SW4000XLS/SW4200XLS - Click to enlarge!
PRO4000XLS and PRO4200XLS
for Double Gates Shown

Low Voltage Swing Gate Operator designed for tubular steel, vinyl, wood, or ornamental gates. The enhanced motor design provides an extended cycle life, ideal for single family estates, housing complexes of up to twenty multi-family units or equivalent commercial applications. The PRO4000XLS is for single swing gates. Add the slave unit PRO4200XLS for a double swing gate (below). Features GTO's true soft start and stop operation and a fast open/close speed as low as 18 seconds. For general operator information, read our frequently asked questions page for more information. If you still need help, e-mail us here. Note: This operator is also available in single and double gate operator kits which include not only the operator(s), but also popular compatible accessories. Click here for more information on the kits.

  • Plastic Control Box - Provided with the PRO4000XLS gate operator.
  • 12 volt system, no electrician needed for installation
  • Gate will work during electrical power outage
  • Quick and easy installation, with user friendly instructions
  • Designed to blend in with your gate with black operator and mounting hardware
  • Solar Panel Charger available for remote locations
  • Will operate a gate up to 20' wide and weighing up to 1000 lbs. each leaf if all proper installation procedures are followed. Minimum size gate for this operator is 8' wide each leaf.  Note: Ball bearing hinges should be used on all gates weighing over 250 lbs (113.4kg).
  • Can operate 90 to 150 gate cycles during peak hours of operation, depending on gate size and weight (see cycle chart link below)
  • Control box can be mounted in protected area away from receiver (may require longer cables)
  • Control box measures 18-1/2" high x 14-1/4" wide x 7-1/2" deep
  • Receiver unit with antenna and 10' cable can be placed in best location for reception of signal
  • Can be operated by remote transmitter, digital keypad, push button or combination
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds)
  • High cycle capability with true soft start and stop operation
  • Full access ready package includes battery, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a standard installation
  • Can operate as 'push to open' or 'pull to open' (extra hardware required for push to open)
  • UL rated for Class I, II, III & IV. System certified to be in compliance with UL 325, 5th edition
  • Two-year limited warranty applies to replacing parts from GTO, Inc.
  • 30 day satisfaction guarantee from Hoover Fence

Technical Specifications:

Drive
  • Powered by resilient 12 volt motor.
  • Temperature rating of motor: -5F (-28C) to +160F (+71C)
  • Opening time is around 18-24 seconds, depending on the size and weight of the gate
  • Range of arm stroke is up to 22" (56 cm), with arm fully retracted is 46.25" (118 cm), mounting point to mounting point
PowerClick for installation video!
  • The PRO-SW4000XLS system is powered by a 12 volt DC/7.0 amp hour, sealed, rechargeable battery (included)
  • Optional second battery fits in control box, used for solar applications or high traffic applications, if needed
  • Battery charge maintained by a 120V AC/60 Htz input and 18 VAC at 40 mA; "active draw" is 2 to 9 amps. NOTE: Transformer should never be connected directly to any battery
  • Optional GTO Solar Panel Charger: float voltage 14.5 VDC output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge
  • Battery Heater recommended for zones where temperatures drop below freezing for extended periods of time to prevent cold weather discharge.

Controls

  • The GTO control board can be programmed for pull-to-open or push-to-open
  • Adjustable auto close, obstruction sensitivity and dual gate sequencing
  • Slow Start/Stop for added cycles and system life
  • Auto-memorization of digital transmitter code
  • Charging regulated circuit on control board. "Sleep draw" is 40 mA; "active draw" is 2 to 9 amps
  • GTO remote-mounted RF receiver tuned at 318 MHz
Includes:
  • Operator arm
  • AC transformer
  • 12 volt battery
  • Control box/control board
  • Receiver with 10 ft. cable
  • Entry transmitter
  • 6 ft. power cable
  • Mounting hardware
  • Installation/safety manual
  • Caution signs.
  • Warning Beeper
  • Adjustable obstacle-reversing safety feature

Click to enlarge!
GTO/PRO SW4000XLS

Included parts

Other parts you may need (click for more)

Cycle Chart for use with transformer provided

PRO-SW4000XLS Cut Sheet

PRO-SW4000XLS Installation Manual

PRO-SW4000XLS Swing Gate Operator
$
 Add To Cart | View Cart
includes ground shipping to USA. Hawaii and Alaska extra.


or by phone: 800-355-2335 toll free

GTO/PRO ACCESSORIES
Click for GTO/PRO Accessories!


Product Code: PRO-SW4200XLS

PRO4200XLS Gate Operator - Slave unit works with PRO4000XLS for double gate applications.

GTO Slave Operator for PRO4000XLS only

Add this unit to the PRO4000XLS above and your system will operate a double swing gate up to 40' wide (20' each leaf). Minimum gate size for this operator is 16' wide (8' each leaf). Burying the power cable directly across the driveway is fine. It can be snaked through conduit also. Cable is 1/4 inch diameter with a 1 inch plug on one end only.

Includes:
  • Operator arm
  • 50' power cable - wires into the control box of the PRO4000XLS
  • Mounting hardware
  • NOTE: This operator will not work as a stand-alone unit. It is a slave unit without a control box and is meant to hook up to the PRO4000XLS control box for use with a double gate.

Click to enlarge!
GTO/PRO SW4200XLS

Included parts

PRO-SW4200XLS Installation Manual

PRO-SW4200XLS Swing Gate Operator
$
 Add To Cart | View Cart
includes ground shipping to USA. Hawaii and Alaska extra.


or by phone: 800-355-2335 toll free


Product Code: PRO-SW4002XLS - Buy Both and Save!

GTO PRO SW4002XLS Double Swing Gate Operator Kit

GTO/PRO Double Swing Gate Operator Kit

The GTO PRO-SW4002XLS system will operate a double swing gate up to 40' wide (20' each leaf). Burying the power cable directly across the driveway is fine, but putting it in conduit is preferred. This system can operate 45-95 gate cycles per day, during peak hours of operation, depending on gate size and weight.

Includes:
  • Master Operator arm with 6 ft. power cable
  • Slave Operator arm with 50 ft. power cable
  • AC transformer
  • 12 volt battery
  • Control box/control board
  • Receiver with 10 ft. cable
  • Entry transmitter
  • Mounting hardware
  • Installation/safety manual
  • Caution signs
  • Warning beeper
  • Adjustable obstacle-reversing safety feature

GTO PRO SW4002XLS Double Swing Gate Operator Kit
GTO/PRO SW4200XLS

PRO-SW4200XLS Installation Manual

PRO-SW4002XLS Swing Gate Operator
$1530.00 $
 Add To Cart | View Cart
includes ground shipping to USA. Hawaii and Alaska extra.


or by phone: 800-355-2335 toll free