Ideal Shield Index
| Ideal Shield Index Bumper Post Sleeves
- Post Sleeves made to slide
over existing posts. Never
paint your posts again.
Available in a variety of
sizes and colors.
Bumper Post Kits
- Kits include Steel Bumper
Posts and Post Sleeves.
Posts available for bolt-in
or core-in applications.
Choice of several sizes
and colors.
|
|
|
 |
Ideal Shield®
Bumper Post Kits
NEVER PAINT YOUR POSTS
AGAIN! |
|
| Ideal Shield® Bumper Post Kits protect
personnel and machinery with the Ideal Shield® Bumper Post Sleeve and Steel Post System.
The system consists of an outer shell constructed of Low Density Polyethylene
Thermoplastic (LDPE) and a Shedule 40 steel inner sleeve - this puts an end to rusting,
chipping, pitting, discoloration, scraping, sanding, priming, and painting. |
|
| Bumper Posts are available in 4",
6", and 8" sizes. Choice of Bolt-In or Core-In designs. Bolt-In design has a
welded base plate with four anchor bolt holes, designed for surface mounting to concrete
surfaces. The Core-In design has an additional 12" length for in-ground mounting, no
base plate. Holes should be drilled oversized and filled with concrete to secure the post
for Core-In design. Both styles available in five heights from 27" to 52". |
|
| Sleeves are available in standard
colors OSHA yellow, blue, red, green, and white. Smooth finish with a dome top.
Approximately .25" thick sleeve contains ultraviolet and anti-static additives to
resist fading and allow easy cleanup, won't rip or tear. Sleeved fits post size ordered.
Optional reflective tape available in a variety of colors, consists of two stripes of
3/4" reflective tape. |
|
|
|
| BUMPER POST - 4"
STANDARD |
|
- Bolt-In and Core-In Styles Available
- Pipe Post - 4" Schedule 40
- Dome Top - Low Density Thermoplastic Polyethylene (LDPE)
with Ultra-Violet and Anti-Static Additives, .250 Nominal Wall Thickness
- Bolt-In: Welded Base Plate - 1/2"x 8"x 8"
w/(4) 13/16" Anchor Bolt Holes (anchors not included)
- Core-In: 12" Extension for Inground Installation
- Clearance: Post Overall - 5 1/4" Nominal Diameter
- Available Heights: 27", 36", 42", 48",
and 52"
|
|
| BUMPER POST - 6"
HEAVY |
- Bolt-In and Core-In Styles Available
- Pipe Post - 6" Schedule 40
- Dome Top - Low Density Thermoplastic Polyethylene (LDPE)
with Ultra-Violet and Anti-Static Additives, .250 Nominal Wall Thickness
- Bolt-In: Welded Base Plate - 5/8"x 10"x 10"
w/(4) 15/16" Anchor Bolt Holes (anchors not included)
- Core-In: 12" Extension for Inground Installation
- Clearance: Post Overall - 7 5/8" Nominal Diameter
- Available Heights: 27", 36", 42", 48",
and 52"
|
|
| BUMPER POST - 8"
HEAVY |
- Bolt-In and Core-In Styles Available
- Pipe Post - 8" Schedule 40
- Dome Top - Low Density Thermoplastic Polyethylene (LDPE)
with Ultra-Violet and Anti-Static Additives, .250 Nominal Wall Thickness
- Bolt-In: Welded Base Plate - 3/4"x 12"x 12"
w/(4) 15/16" Anchor Bolt Holes (anchors not included)
- Core-In: 12" Extension for Inground Installation
- Clearance: Post Overall - 9 5/8" Nominal Diameter
- Available Heights: 27", 36", 42", 48",
and 52"
|
|
  |
Applications: Gated entrances, loading
docks, fire hydrants, drive-thrus, storage
areas, store fronts, industrial guarding,
car washes, parking areas, guard shacks,
and any place that requires protection.
|
|
  
  
 
Installation Examples
(click to enlarge) |
|
|
|
| NOTE: Bumper
Post Kits ship by common carrier truck. Prices shown do not include shipping. After
carting your order, you will be contacted with a shipping quote. No orders will be placed
until the shipping charges are approved by the customer. |
|
OPTIONAL REFLECTIVE TAPE |
| TWO 3/4" STRIPES REFLECTIVE TAPE, INSTALLED |
REFLECTIVE STRIPES - (available when ordering post kits only) |
$6.25
/per post |
RED
| YELLOW
| WHITE |
|
