Shop: Adjust-A-Gate Kits
Note: The gate you build will be approximately 2" shorter width than your gate opening size to allow room for hinges and latch. Maximum width of gate kits is actually 58" (AG36) and 94" (AG60).
# | Qty | Part Name |
---|---|---|
1 | 2 | 1-1/2" x 1-1/2" x 45" Vertical Members |
2 | 2 | 1" X 1" X 26" Inside Slip Members (or 1" x 1" x 48" for AG60) |
3 | 1 | Truss Cable Kit |
4 | 2 | Gate Frame Hinges |
5 | 2 | Wood Post Hinges |
6 | 1 | Gate Latch |
7 | 12 | 1" Wood Screws |
8 | 6 | 3" Wood Screws |
9 | 2 | Tek Screws |
10 | 4 | 2" x 1/4" Self Drilling Screws (not shown) |
11 | 1 | Gate Stop Kit |
Step 1
Installing Post Hinges
The Adjust-A-Gate™ is made to swing in. With this in mind you will want to locate your hinges toward the back edge of the gate post so the latch will work properly.
Step 2
Assemble Gate Frame
The Adjust-A-Gate™ can be used for 4', 5', and 6' high fences and will adjust to virtually any opening from 36" to 60" (AG36) or 60" to 96" (AG60).
Step 3
Positioning
Step 4
2 x 4 Installation
Step 5
Hinges, Wire Truss Cable and Gate Stop Installation
Step 6
Installing Fence Boards, Adjusting Gate