Snug Cottage Hardware Adjustable Cranked Band Hinges

Adjustable Cranked Band Hinges (8295-ACB)

Our Adjustable Cranked Band Hinges are a variation of our Cranked Bands with Pins (#8295) that allow for easy lateral adjustment in case the post or gate shifts/moves.

The Adjustable Cranked Band Hinges are ideal for Wood Gates.

• Easy Lateral Adjustment in case the Post or Gate moves (works with 1/8" to 1" gap between Gate and Post)
• Used Mounted Flush with Front of Post
• Available in Hot Dipped Galvanized or Black Powder Coat Over Hot Dipped Galvanized Finish (BPPCG)
• If installed with both pins up then the gate can be easily removed. Installing one pin down prevents removal of the gate.
• Supplied with Matching 2" #12 Stainless Screws
• We also carry a matching "Dummy" Hinge Front (#8293) for use on the opposite side of the gate

Please Note: This style of hinge has a loose fit on the pin. This slackness will not be evident when both hinges are mounted.

Please Note: Hinges require that a Carriage Bolt (preferred) or Lag Bolt be utilized on each hinge as shown Here. These are not included with the Hinge pairs because the length of bolt required will vary with the installation. Hinge sizes 7-16" require 3/8" diameter bolts and 18-48" require 1/2" diameter bolts. You will need bolts 1" longer than the overall thickness of your gate or door.