Chain Link Fence Gate Drop Rod - Cane Bolt Type (No Guides)

Chain Link Fence Gate Drop Rod - Cane Bolt Type (No Guides) (CL-CANE-BOLT)

Residential drop rods are typically used on residential chain link double drive gates. Double drive gates are two gates which work in conjunction with one another, i.e. two six foot wide gates which are used to close a twelve foot wide opening. When the two gates meet at their latching side, a drop rod, or gate cane bolt as it is often referred to as, is used to 'pin' the gates down and hold it firmly in place. Often, an additional simple chain link fork latch will be used to latch the two gates together.

Chain link drop rods typically install vertically and parallel to the gates' vertical uprights using drop rod guides. With this drop rod, use two female gate hinges with bolts as drop rod guides and order female hinges which fit the tubing size of the gate uprights. A small piece of pipe is often driven into the ground to serve as a place to slide the drop rod. A chain link gate centerstop may also be used as a drop rod holder.

Drop rods are available in either 30" or 36" lengths. Order accordingly.