Chain Link Gate Corners, Pressed Steel, Commercial

Our pressed steel commercial chain link gate corners are available for both 1-5/8" and 2" framework. The pressed steel fitting is heavy duty and are less likely to crack under stress and abuse.

One gate requires four fittings. Fitting is suitable for most single walk gates and double chain link gates. For larger size gates and double drives, install a truss cable or truss rod with truss rod tightener to prevent gate from sagging. Fitting have holes in the inside of the corner to connect a truss wire/ cable. Tighten truss wire with a turnbuckle. Gates wider and or taller than 5' should also have a center brace. You may install a center brace using a gate tee, end rail clamps and/ or line rail clamps.