1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
Our pressed steel residential chain link gate corners are available in either a top fit or bottom fit configuration. The pressed steel fitting is heavy duty and are less likely to crack under stress and abuse.
To build one gate, order two tops and two bottoms. Fitting is suitable for most single walk gates and double chain link gates. For larger size gates and double drives, install a truss cable or truss rod with truss rod tightener to prevent gate from sagging. Fitting have holes in the inside of the corner to connect a truss wire/ cable. Tighten truss wire with a turnbuckle. Residential 1-3/8" pipe frames insert snugly, simply install self-tap screws to finish frame. Gates wider and or taller than 5' should also have a center brace. You may install a center brace using a gate tee, end rail clamps and/ or line rail clamps.
| Type | Weight |
|---|---|
| Top Fit 1-3/8" |
0.71 lbs. |
| Bottom Fit 1-3/8" |
0.81 lbs. |
Weights shown are approximate.
Average Customer Rating: (2 Reviews) Write a Review (requires login)
Chain link fence parts order and delivered in 5 working days
Needed to make some fence repairs and Hoover Fence Co. had exactly what was required to do these repairs. I had a couple of questions about some of the supplies I needed. After speaking with the lady I was relieved to find out the info I wanted was very well explained to me. I would recommend them to anyone!
