1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
Tension wire may be used for a variety of applications. It is commonly used as a bottom tension wire on chain link fences and serves both structural and aesthetic purposes. Bottom wire helps prevent animals and people from 'pushing' their way underneath a fence. It will not prevent an animal from digging underneath a fence, however may help discourage this behavior.
Tension wire may be retrofitted on to existing fences. Wire would be stretched on outside and slid up under the bottom of the fence. We recommend bottom wire on all chain link fences, especially vinyl coated chain link since it tends to be more elastic in nature. Bottom wire is also recommended on all chain link fences installed for security purposes.
Tension wire is occasionally used in lieu of top rail on a chain link fence. This cuts down on costs significantly and may make the fence more difficult to climb. Be sure to brace and truss all terminal connections if tension wire is to be used in place of top rail to prevent terminal posts from 'pulling'.
Wire is 9 gauge, 6 gauge finished after coating. Sold per foot or in 500' rolls.
| Length | Weight |
|---|---|
| 1' | 0.07 lb |
| 500' | 36 lbs |
Weights shown are approximate.
Average Customer Rating: (1 Review) Write a Review (requires login)
The quality of the materials was fine, but it was a mini week delay with no no communication which was frustrating.
