DAC Industries Standard Nylon Stealth Rollers for Cantilever Gates - Round Post

Item # DAC-STD-ROUND

Actual product(s) may vary from pictures shown

DAC Industries Standard Nylon Stealth Rollers for Cantilever Gates - Round Post (DAC-STD-ROUND)

Details

The Standard Stealth Series Cantilever Rollers for Round Posts are the new generation of cantilever rollers for sliding gates. Manufactured from virgin UHMW plastic and graphite impregnated nylon, Stealth cantilever roller assemblies are far superior to any of the old metal casting type.

Use these for any sliding or rolling gate made out of round or square stock; typically four are required per gate. Gates are 'sandwiched' in between two top rollers and two bottom rollers. These are excellent for larger gates and any automated sliding gates. The design of these high quality rollers allow even the largest of cantilever sliding gates to glide open and close effortlessly. Ease of slide will prolong the life of gate operators since it decreases stress on gate opener. Added advantages of these rollers include maintenance free, durability and strength, and smooth operation.

Standard Rollers: Single Bearings (2,200 lbs. load capacity)

Specifications

Stealth Cantilever Gate Roller Assemblies

Note From the Manufacturer:

All of the DAC Industries, Inc. "Stealth" cantilever rollers are made with a hot rolled steel chassis. The chassis is formed, welded, and then hot dip galvenized after fabrication to prevent rust. We chose to make the chassis out of pressed steel rather than a casting to allow you to weld it to the post if you desire. The support gussets are strategically placed to allow easier access to the nuts for faster and easier installation and removal.

Our UHMW rollers are manufactured from virgin resins with no recycled materials to compromise the strength of the finished product. They also have UV (ultra-violet) inhibitors to protect against deterioration of the plastic by sunlight. Compression molding under 50,000 p.s.i. of pressure forces a bonding of the materials and strengthens the rollers to allow them to hold up under the constant stress caused by cantilever gates.

Our premium graphite impregnated nylon rollers (#5800 and #5668) are cast and then machined to their final shape eliminating any rough surfaces which cause friction. The graphite impregnated roller is made from a harder material than the UHMW roller and can handle larger gates. Also, the 6-5/8" roller (#5658) has double bearings to handle extremely large gates.

All our rollers use permanently lubricated sealed bearings. The bearings are not molded into the rollers, but are press fit. If a bearing should ever need replacing it can be easily removed and a new bearing installed. This maintenance feature addresses the most common cause of roller failure.

A nylon embedded steel lock nut holds the roller onto the chassis. This gives a more secure mounting than cotter pins or snap rings.

DAC Industries Stealth Cantilever Roller Specification Drawing (PDF)

Standard Grade:

Part Number	Post Size	Frame Size	Load Capacity	Weight Each
DAC-5800-3	3" Round	2-1/2" Round	2,200 lbs.	11 lbs.
DAC-5500-3	3" Round	2" Round	2,200 lbs.	11 lbs.
DAC-5500	4" Round	2" Round	2,200 lbs.	11 lbs.
DAC-5350-3	3" Round	2" Square	2,200 lbs.	11 lbs.
DAC-5350	4" Round	2" Square	2,200 lbs.	11 lbs.
DAC-5800	4" Round	2-1/2" Round	2,200 lbs.	11 lbs.

Weights shown are approximate.

Reviews

Average Customer Rating: 5 out of 5 stars (5 Reviews) Write a Review (requires login)

Sort by:

Very pleased with the gate rollers

Reviewer: A viewer from Alberta, Canada

Very pleased with the gate rollers. Excellent quality and heavy duty. They are very quiet when my gate is opened or closed. Thank you for shipping to Canada! Delivery was reasonable considering customs, etc. It would have been nice to have been provided with a tracking number as soon as they were shipped. When I requested one, it was provided quickly. Maybe you could consider having a distributor in Canada?

They were responsive and shipped..

Reviewer: A viewer from Texas

They were responsive and shipped quickly. I would have given 5 stars but shipping costs are high. Cost was at least twice as much as it should have been.

Fast service and excellent product

Reviewer: A viewer from NC

Fast service and excellent product. Just as advertised.

Very heavy duty quality product

Reviewer: A viewer from Louisiana

Very heavy duty quality product. Ordering was simple, delivery on time. Very pleased with the product and process.

The employees was very helpful on the..

Reviewer: A viewer from Ohio

The employees was very helpful on the parts needed to repair my gate. Thank you.

1-5 of 5

Shipping

Country

State

Zip/Postal

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.