EMX VMD202 5 Wire Direct Burial Motion Sensor

5 Wire Direct Burial Motion Sensor (EMX-VMD202-5-P)

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today. The probe and its electronics are housed in a slim design that is buried next to a driveway. The VMD202-R Sensitivity Remote Control (Sold Separately) makes installation and fine tuning simple.

Program the VMD202's 10 sensitivity settings with the VMD202-R Sensitivity Remote Control. Simply plug the VMD202-R into the harness to tune the VMD202. The setting is retained in non-volatile memory. The VMD-R can be removed and used for multiple installations, or left in place if tampering is not a concern.

The VMD202 Vehicle Motion Detector accepts a wide range of power inputs. If used in a location without power, one 9V battery will power the VMD202 for 6 months. The low standby current of 250uA is great for solar power applications.

The VMD202 vehicle motion detector is supplied with a 50-ft. lead. The optional sensitivity remote is sold separately.

VMD202 Features:
• Single Piece Sensor
• Simple Installation
• Easy Sensitivity Adjustments
• Energy Conservation - Great for low-voltage solar applications
• Easy Integration
• Probe assembly and wire are water tight and direct burial compatible
• Harness is pre-wired onto lead wire for easy installation
• Settings are placed on a non-volatile memory in case of power failure
• Accepts wide range of power inputs from 9 - 41 VDC or 6 - 29 VAC
• Low current consumption of 250uA standby and 12mA activated