EMX UL325 Retro-Reflective Photoeye Safety Sensor - NC and 10K Monitored

Item # NIR-50-325

Actual product(s) may vary from pictures shown

Details

The NIR-50-325 is an extended range, retro-reflective photoeye sensor providing entrapment protection for overhead doors, gates and barriers. The NIR-50-325 device is UL325-2018 compliant and features an internal 10k resistor for monitored operation. Its flexible voltages, compact design and LED indicators make this UL325 retro-reflective photoeye easy to install.

The NIR-50-325 is also supplied with mounting brackets and hardware, as well as a watertight package for reliable outdoor installation.

EMX NIR-50-325 UL325 Retro-Reflective Photoeye Safety Sensor Features:

UL325-2018 complaint
Flexible voltage: 12 - 240 VDC, 24 - 240 VAC
Watertight package for reliable outdoor installation
Operating range: 50 feet
Lead wire: 6 feet
2 LED indicators
Sensitivity adjustment
Compact size: 2.5" high, 1.5" deep, 0.75" wide

EMX NIR-50-325 Package Includes:

(1) NIR-BR - Black Powder Coated Steel Mounting Bracket with Screws
(1) NIR-50-325 - UL325 Retro-Reflective Photoeye Safety Sensor
(1) REFLECTOR-O - White Plastic Reflector - 3" Diameter

EMX NIR-50-325 Retro-Reflective Photoeye Safety Sensor Brochure (PDF)

Ordering Notes:

Effective August 1, 2018

A resistor required for monitoring must be permanently installed by the manufacturer. (Separate components are no longer acceptable.)
Each entrapment zone requires two means of protection — either two external sensors, two inherent means or one external and one inherent. (Previously each gate operator had to have two means of protection.)

Some installations may require the Protective Hood for the Photoeye and Reflector. They are available separately.

Specifications

Operating Range	0.5 ft (0.1 m) to 50 ft (15.2 m)
Sensitivity Adjustment	Potentiometer
Signal Stability Indicator	Yellow LED
Alignment Indicator	Red LED
Relay Output	Form C contacts (NO, COM, NC), 30VAC/VDC, 2A
Resistive Termination	10k Ohm (Internal)
Response Time	10ms
Power	12 to 30VDC, 24 to 30VAC @ 60 Hz
Current Draw	83mA
Operating Temperature	-4° to 131°F (-20° to 55°C)
Environmental Protection	IP 66 IEC
Dimensions (L x W x H)	1.3" (33 mm) x 0.8" (21 mm) x 2.6" (66 mm)
Weight	0.2 lbs (91 g)
Connections	5 wires, 6.5' (2 m) cable
Certifications	CE, UL325-2018

Instructions

EMX NIR-50-325 Retro-Reflective Photoeye Safety Sensor Installation Manual (PDF)

Reviews

There are no reviews yet. Be first to Write a Review (requires login).

Shipping

Country

State

Zip/Postal

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.