GTO Automatic Electric Gate Lock

GTO Automatic Electric Gate Lock (FM144)

A must for added security on all automated single and dual swing gates. This automatic gate locking system works in conjunction with the gate opener system to lock and unlock automatically.

Recommended for gates over 8 ft. (2.4m) long and all high wind areas. Comes with a keyed manual release.

This electric latching lock is designed for gates using Linear/GTO Gate Openers. Electric locks can be used on single or double drive gates. For pedestrian gates, use the Bulldog lock (FM145). Compatible with all Linear/GTO Gate Openers as well as other Gate Openers installed for pull-to-open operation. These horizontal locks are a MUST for added security. Solenoid driven, plated steel bolt lock has a black powder coated finish. Proven to withstand 3500 lbs. of force. Comes with a keyed manual release. The gate will lock automatically when closing and unlock when opening, regardless of which access device you use.

This lock is used for gates that "pull-to-open". Lock is mounted on the inside of the gate, the same side the operators are mounted on. The gate opens inward, away from the road. When using on double drive gates, sequencing of the gate will stabilize one half of the gate for the lock to engage when fully closed.

Lock can be used for various applications including iron, aluminum, and chain link gates. Mounting hardware is not supplied with this lock because applications will vary. Hardware is readily available at any hardware store. Please read the Installation Manual for included parts and mounting information.

The Linear/GTO control boards are ready to accept this add-on accessory. Simply mount the lock, run the provided wire across the gate to the control box and plug it in.