GTO Push-to-Open Adapter

GTO Push-to-Open Adapter (347IH)

The 347IH (also called FM148) push to open bracket for GTO PRO2000XL, GTO PRO2000XLS, and Mighty Mule swing gate operators that require an optional bracket for push to open applications. 11" overall, 9" centers on specified holes (also used on discontinued PRO1500,2500, and older PRO3000 series operators).

Allows conversion of the standard pull to open application to a push to open on GTO swing gate operators. Pull to open means the gate will swing towards the side the arm is attached. That normally is on the inside of the gate, although operators can be installed on either side that allows the gate to swing clearly. Push to open is the opposite. The gate would swing in the direction away from the side that the operator is mounted. One bracket is required for each actuator arm. Two are required for a double swing gate that has two actuator arms. These brackets replace the standard post pivot brackets that come with the operators.