Hoover Fence S-Series Tubular Barrier Single Gate Kits - Galvanized Steel

• 1 - 4' High Single S-Series Tubular Steel Barrier Gate (Width Ordered)
• 2 - 2" Aluminum Post Caps for Gate Uprights
• 2 - 4" x 8' Galvanized HF40 Gate Posts
• 2 - 4" Aluminum Post Caps for Posts
• 2 - 4" x 2" Malleable Butt Hinges
• 1 - Industrial Fulcrum Single Gate Latch

• 1 - 4' High Single S-Series Tubular Steel Barrier Gate (Width Ordered)
• 2 - 2" Aluminum Post Caps for Gate Uprights
• 1 - 6-5/8" x 8' Galvanized Sch40 Hinge Post
• 1 - 4" x 8' Galvanized HF40 Latch Post
• 1 - 6-5/8" Aluminum Post Caps for Hinge Post
• 1 - 4" Aluminum Post Caps for Latch Post
• 2 - 6-5/8" x 2" Malleable Butt Hinges
• 1 - Industrial Fulcrum Single Gate Latch

Our kits include Fulcrum Latches, in either the single or double configuration, depending on the type of gate ordered. A FenceLoc™ in conjunction with a commercial grade drop rod is another option. Each of these latches are padlockable and may be purchased separately.

With proper planning and without an operator, these can easily be installed in half a day, however often the posts are set in a couple hours one day. The gate is then hung in a few minutes the next day once the cement has cured.

Yes, we have built these gates with diagonal bracing, additional vertical, and additional horizontal bracing. Please use our 'fax-a-quote' form and supply us with a simple sketch of your design. Please note additional fees may apply.

Our standard gate kits are built to fit the opening size listed. Therefore the 10' barrier gate will not measure 10' wide finish size; it will be slightly less to account for the hinge and latch space allowance. In general, if you order all the components from us, e.g. posts, hinges and a latch, we will build the gate for that opening size specified. If you want your gates built to a finish width, please specify upon ordering.