Ideal Carolina #4035 Aluminum Arched Walk Gate - Bottom Rings

These Gates match Ideal Carolina #403M Fence Sections.

• Rail top style with every other picket missing between two top rails, with a modified bottom rail (pickets end at bottom rail) and rings between the two bottom rails
• Available in 3', 4', 4-1/2', 5' and 6' heights
• Modified 4-1/2' height meets stringent pool codes that require at least 45" spacing between horizontal rails (always check with your local pool code which may vary)
• All heights have 3 rails
• Height shown is for the lowest part of the arch
• Gate will arch 4" to 6" depending on the width of gate
• Posts are 2" square, sold separately
• Use gate posts on both sides of gates
• Order Gate End Posts if matching fence sections will be attached to the posts, order Gate Blank Posts if gate will be free-standing.
• 4" square posts recommended for gates over 24 square feet in size, especially when a gate operator is to be used
• No braces, gates are of welded construction fabricated by heavy wall aluminum
• 6063 T5 aluminum alloy is strong as steel without the rust!
• IdealCoat™ finish tested to exceed industry standard 2604
• Available in Black, White, Bronze, and Hunter Green
• Manufacturer's Limited Lifetime Warranty

Shop Ideal Accessories

Shop this Collection - Carolina #403M

Ordering Notes:

Ideal aluminum swing gates do not include hinges and a latch. Please shop Ornamental Gate Hardware for options that will work with your gate.