Lockey USA TB250+ Light Duty Adjustable Hydraulic Gate Closers

Item # LUS-TB250-P

Actual product(s) may vary from pictures shown

Lockey USA TB250+ Light Duty Adjustable Hydraulic Gate Closers (LUS-TB250-P)

Details

The Lockey TB250+ Adjustable Pedestrian Gate Closers are fully featured commercial closers that provides consistent automatic closing without slamming. The gate closers have an adjustable closing speed and a choice of bracket fitting holes giving more control of the gate when closing. Mounted on the gate surface, the Lockey TB Plus Pedestrian Gate Closers are suitable for retrofitting to existing gates and for fitting to new gates at the time of fabrication. Each gate closer kit includes a closer, brackets, fitting bar, and instructions. Mounting bolts and screws are not included as they vary according to the gate and post specification. Maintenance is only regular inspection and lubrication. Closing speed is adjusted by turning a hexagon headed screw located on one eyelet. As with all gate closers of this type, it is advisable to fit a 'stop' restricting the opening angle to avoid damage to the closer.

Lockey LUS-TB250+ Hydraulic Garden Gate Closer Features:

Closes large and small gates up to 125 lbs.
Hydraulic/Nitrogen Gas controlled closing speed.
Installs on side, top, middle or bottom of right or left hand gates.
Mounts on opening side of gate, pushing the gate closed.
Maximum opening angle of 110 degrees (LockeyUSA® recommends use of a mechanical stop to restrict opening angle).
Mounting brackets and fitting bar included.
Manufacturer's 6 Month Warranty

Specifications

Lockey® LUS-TB250+ Hydraulic Gate Closer Specification Drawing

Lockey LUS-TB250+ Hydraulic Gate Closer Technical Specifications:


Gate Weight:	50-125 lbs.
Gate Width:	36-50 Inches
Maximum Opening Angle:	110°
Compatible Gate Materials:	Vinyl, Wood, Steel, Aluminum
Closing/Latch Method:	Hydraulic/Nitrogen Gas
Color:	Bright Zinc, Black, or White
Hinge Arrangement Required:	In-Line or Offset
Opening Pressure:	Approximately 3-7 lbs.

Added Opening Force Comparison Chart:

Gate Closer Model	36"W Gate	48"W Gate	60"W Gate	Constant Pressure
No Closer	3/4 lb. Pressure	1/2 lb. Pressure	1/4 lb. Pressure	0 lbs. Pressure
LUS-TB250+	6 lbs. Pressure	4 lbs. Pressure	3 lbs. Pressure	45 lbs. Pressure
LUS-TB450+	10 lbs. Pressure	8 lbs. Pressure	6 lbs. Pressure	90 lbs. Pressure
LUS-TB650+	13 lbs. Pressure	10 lbs. Pressure	8 lbs. Pressure	135 lbs. Pressure

Added Opening Force at 45° Open Comparison Chart:

Gate Closer Model	36"W Gate	48"W Gate	60"W Gate
LUS-TB250+	7 lbs. Pressure	5 lbs. Pressure	4.5 lbs. Pressure
LUS-TB450+	13 lbs. Pressure	9.5 lbs. Pressure	8 lbs. Pressure
LUS-TB650+	18.5 lbs. Pressure	13.5 lbs. Pressure	12 lbs. Pressure

NOTE: All measurements are taken using the 1st mounting hole on the post bracket with a 3" distance between the center of the hinge and the center of the post mounting bracket. The opening pressure will INCREASE using the 2nd, 3rd and 4th holes. These are "ADDED" opening pressures. This chart DOES NOT take into consideration the hinge arrangements, quality of hinges, ease of operation, wind, etc.

Warranty

Lockey Warranty

Instructions

Lockey® LUS-TB250+ Gate Closer Installation Guide (PDF)

Videos/Media

Reviews

Average Customer Rating: 5 out of 5 stars (1 Review) Write a Review (requires login)

Sort by:

Experienced good customer service and..

Reviewer: A viewer from CA

Experienced good customer service and prompt shipping of all materials with no surprises. Materials arrived in good condition.

1-1 of 1

Shipping

Country

State

Zip/Postal

Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.