Vinyl Fence Posts

Made from virgin vinyl and co-extruded with an inner layer for strength and outer layer for UV protection, our vinyl fence posts are hollow and designed to be cemented directly in the ground without the need of any lumber inside for strength. Posts supporting gates, some posts for 7-8' high fences, and some other posts may require filling with concrete for support. An aluminum post stiffener for vinyl fences is another alternative. Most posts simply get set in the ground in cement without the need of anything inside them.

Vinyl fence posts are available in a true 4" square and 5" square sizes with an assortment of vinyl fence post cap choices sold separately. Generally 4" posts are used on 4' high fences and shorter. 5" square vinyl fence posts are used on vinyl fences 5' high thru 8' high.

Vinyl fence posts are available routed with holes in side(s) to accept horizontal rails of fence section (sold separately). End posts have holes routed in one side to start or terminate a fence line. Corner posts have holes on adjacent sides for 90-degree or thereabout turn. Line, or intermediate posts, have holes on opposite sides of posts to continue a fence line. Blank posts are available for free standing hinge or latch gate posts (no section attached) and custom applications requiring one. Professional grade gate hardware made from polymer or stainless steel is specifically designed to compliment vinyl gates and posts.