|
|
MC-306010 Multi-Code Single Button Key Ring Transmitter
- Test/operate LED
- Neutral case with fine grain finish
- Molded-in hole to accept keychain or key ring
- Power: long-life 12V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 2.4 x 1.5 x .625 inches
- Instructions
- $35.44
- Add to
Cart | View Cart
|
ALL
PRODUCTS ON THIS PAGE
(continental USA only)
|
|
|
MC-307010 Multi-Code Single Button Micro Transmitter
- Test/operate LED
- Neutral case with fine grain finish
- Molded-in hole to accept keychain or key ring
- Power: long-life 12V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 2 x 1.5 x .625 inches
- Instructions
- $35.44
- Add to
Cart | View Cart
|
|
|
|
MC-4900 Multi-Code Single
Button Micro Transmitter
(Code Protector)
- !!NOTE!! This item will only work
with the Code Protector receivers.
- If your transmitter is programmed via dipswitches, you will
have to use the above items
- Test/operate LED
- Grey case with fine grain finish
- Molded-in hole to accept keychain or key ring
- Frequency: 300 Mhz
- Instructions
- $36.99
- Add to Cart
| View Cart
|
|
|
|
MC-308301
Multi-Code Two Button Key Ring Transmitter
- Test/operate LED
- Neutral case with fine grain finish
- Molded-in hole to accept keychain or key ring
- Supplied velcro strip for visor or dashboard mounting
- Power: long-life 12V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 2.5 x 1.5 x .625 inches
- Instructions
- $45.90
- Add to
Cart | View Cart
|
|
|
MC-308911
Multi-Code Single Button Transmitter
- Test/operate LED
- Neutral case color
- Molded design to comfortably fit the hand
- Easy access to battery and dip switch
- Power: long-life 9V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875 inches
- Instructions
- $32.74
- Add to
Cart | View Cart
|
|
|
MC-412001
Multi-Code Two Button Transmitter
- Test/operate LED
- Neutral case color
- Molded design to comfortably fit the hand
- Easy access to battery and dip switch
- Power: long-life 9V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875 inches
- Instructions
- $38.48
- Add to
Cart | View Cart
|
|
|
DIGI-5030-300
Multi-Code Compatible Three Button Transmitter
- Test/operate LED
- High-quality American-made version of the Multi-Code
transmitter
- Control 3 separate receivers
- Power: long-life 9V battery
- Frequency: 300 Mhz
- Codes: Main = 1,024, Dual = (2) sets 512 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875
- Instructions
- $38.48
- Add to
Cart | View Cart
|
|
|
MC-414001
Multi-Code Four Button Transmitter
- Test/operate LED
- Neutral case color
- Molded design to comfortably fit the hand
- Easy access to battery and dip switch
- Operates two independent garage doors or an automatic gate and
a garage door
- Power: long-life 9V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.75 x 2.5 x .875
- Instructions
- $39.83
- Add to
Cart | View Cart
|
|
|
MC-109020
Multi-Code Receiver
- 300 Mhz
- 10 switch code settings
- Works with any door or gate opener
- Dimensions 3" x 5-1/2" x 1-1/2 inches.
- 11" wire antenna included
- 3-tab universal 24V operator mounting
- No separate transformer or adapter needed
- Instructions
- $42.88
- Add to
Cart | View Cart
|
MC-109020-308911
- Multi-Code Receiver/One Button Transmitter
- Buy receiver/transmitter as set and save 15%!
- Includes receiver at left and 1-button transmitter above
- $47.85
- Add
to Cart | View Cart
|
|
|
|
MC-420001
Digital Wireless Keypad
- Interfaces with the Multi-Code line of radio receivers
- Its wireless design mounts with two screws
- Tamper-resistant and weatherproof
- 12-button alphanumeric keypad
- Programming of this unit is done from the front and features a
four (4) digit entry code as well as a master code for programming
- Power: 9V battery.
- Codes: 4 digit PIN access
- Frequency: 300 Mhz
- 10, binary dipswitches
- Dimensions: 2.75 x 6.25 x 1
- Appearance subject to change
- Instructions
- $51.17
- Add to
Cart | View Cart
|
|
|
MC-4100-05
Hard-wired Digital Keypad without Transformer
- The programming of this unit is done from the front and
features a four (4) digit entry code as well as a master code for programming
- 24 VAC
- Instructions
- $47.66
- Add to
Cart | View Cart
|
|
|
MC-302210 Safety Edge
Transmitter
- **NOTE** Only compatible with
Multi-Code receivers (not included) and must be used with a safety edge.
- Radio transmitter is used with a safety edge, like the Miller
Leading Edge, and replaces the coiled wire that runs from the edge to the gate or door
operator.
- It is water-resistant and can be mounted right on the gate.
- Power: 9V battery
- Frequency: 300 Mhz
- Codes: 1,024 (set by dip switches)
- Instructions
- $101.25
- Add to
Cart | View Cart
|
|
|
|
MC-109920
1-Channel 110V Gate Receiver
- For use inside metal enclosures and in other applications
requiring stonger signal reception
- Antenna with coaxial connector supplied
- 1 amp output @ 30 VAC maximum on relay contacts
- 115 VAC, transformer input (included)
- Frequency: 300 MHz
- Codes: 1,024 (set by dip switches)
- Dimensions: 5.25 x 3.625 x 1.5 inches
- Instructions
- $60.41
- Add to
Cart | View Cart
MC-109950 1-Channel 12V-24V Gate
Receiver
- Dual frequency - Multi-Code or Stanley compatible; jumper
selectable
- 12-24 Volts AC or DC
- Auto sensing - no jumpers to set
- Single relay
- Supplied with whip antenna, three feet of coaxial cable and
bulkhead connector
- Power: 12-30 VAC or 10.5-30 VDC; 16 mA nominal, 50 mA maximum
while relay is triggered
- Frequency: 300 and 310 MHz
- Dimensions: 5.25 x 3.625 x 1.5 inches
- Instructions
- $57.71
- Add to
Cart | View Cart
MC-106604 Local Antenna
|
|
|
MC-302850
2-Channel 12V-24V Gate Receiver
- Dual frequency - Multi-Code or Stanley compatible; jumper
selectable
- 12-24 Volts AC or DC
- Auto voltage sensing - no jumpers to set
- Two relay
- Supplied with whip antenna, three feet of coaxial cable and
bulkhead connector
- Power: 12-30 VAC or 10.5-30 VDC; 16 mA nominal, 50 mA maximum
while relay is triggered
- Frequency: 300 MHz and 310 MHz
- Dimensions: 5.25 x 3.625 x 1.5 inches
- Instructions
- $90.45
- Add to
Cart | View Cart
MC-106604 Local Antenna
|
|
|
MC-302101
Heavy-duty Two Channel Gate Receiver
- For any application requiring two channels in one location -
512 codes each channel
- Up-down, open-emergency-stop, and other functions
- For heavy-duty operation
- Cabinet meets NEMA 13, JIC specs
- Two-channel relay output, N/O, N/C, Common - rated 1 amp @ 30
VAC max
- Power: 24 VAC 10% power
- Frequency: 300 MHz
- Codes: 1,024 total (set by dip switches); 512 codes each of
two channels
- Dimensions: 6 x 8 x 4 inches
- Instructions
- $128.93
- Add to
Cart | View Cart
MC-106604 Local Antenna
- Standard replacement whip antenna, see image.
- Includes Free UPS Ground Shipping!
- $9.99
- Add to
Cart | View
|
 
 
|
|
|
MC-106603
Multi-Code Coaxial Antenna Kit
- Permits the remote location of the antenna on radio receivers
equipped with a type F screw connector
- The antenna can be moved away from a metal structure or to an
outside location for better receiver performance
- This unit is used with the 1099 and 3021-8 Series receivers
- 14' antenna cable
- Instructions
- $38.39
- Add to
Cart | View Cart
MC-106604 Local Antenna
|
|
The items below are NOT compatible with the items above. |
