GTO Push To Open Adapter

Allows conversion of the standard pull to open application to a push to open on GTO swing gate operators. Pull to open means the gate will swing towards the side the arm is attached. That normally is on the inside of the gate, although operators can be installed on either side that allows the gate to swing clearly. Push to open is the opposite. The gate would swing in the direction away from the side that the operator is mounted. One bracket is required for each actuator arm. Two are required for a double swing gate that has two actuator arms. These brackets replace the standard post pivot brackets that come with the operators. The PRO3000 and PRO4000 can be configured for pull to open or push to open without additional hardware in some cases, .

347IH (FM148)

347IH (also called FM148) push to open bracket for GTO PRO2000XL and Mighty Mule swing gate operators that require an optional bracket for push to open applications.
11" overall, 9" centers on specified holes.
(also used on discontinued PRO1500,2500, and older PRO3000 series operators)

$ each  Add To Cart | View Cart
 

R4388

R4388 push to open bracket for GTO PRO4000XL swing gate operators that require an optional bracket for push to open applications.
(also used on discontinued PRO3000XL made from 10/2008 to 5/2010)

$ each  Add To Cart | View Cart
 

R4KPTO

R4KPTO push to open bracket for GTO PRO4000XL swing gate operators with HBP4XL Hardware Upgrade that require an optional bracket for push to open applications.
(also used with standard hardware for PRO4000XL made before 5/2010)

$ each  Add To Cart | View Cart