Snug Cottage Hardware Adjustable Old Fashioned Hinges for Vinyl Gates, Pair

This hardware is ideal for use with Vinyl Gates. We also carry a version for Wood Gates (#8292-SS)

• 304 Stainless Straps and Cast 304 Stainless Cups
• Black Polyester Powder Coated
• Slotted Strap for Easy Adjustment (Adjusts 1/2" Either Way of a 1" Gate Between Gap and Post)
• Easy to Install - Gate Sandwiched Between Straps Offers Strength and Support - Gate Post and Gate Stile Insert Recommended
• Supplied with 5" x 1/4" Black Stainless Carriage Bolts, Acorn Nuts, and Washers for Gates up to 4" Thick
• 1.5" Black Stainless "TEK" Screws to Attach Cups to Post
• Filler Blocks are Required if Rails are Thinner than Stiles (The Use of Solid Cellular Material such as Azek is Recommended)
• Sold in Pairs

Please Note: Hinges require that a Carriage Bolt (preferred) or Lag Bolt be utilized on each hinge as shown Here. These are not included with the Hinge pairs because the length of bolt required will vary with the installation. Requires 3/8" diameter bolts. You will need bolts 1" longer than the overall thickness of your gate or door.