L&C Twist Tight Preformed Steel Tie Wires - 1.2 oz Galv. (9ga)
Item # TWIST-TIGHT-912
Details
Details
Twist Tight Preformed Steel Tie Wires - 1.2 oz Galv. (9ga)
The unique shape of Twist Tight Ties insures tighter fabric tension. Ideal for high security uses.
Twist Tight® Fence Ties were designed specifically to meet the high standards of correctional institutions. They are ideal in security applications using 2-inch mesh or smaller. Ends are twisted opposite the fabric making it difficult to take off. Yet, they’re easy to install with our custom power drill bit tool.
Twist Tight Ties® draw in a complete diamond, or more on mini mesh, for tighter fabric tension. That means less fabric vibration to prevent false security alarms. For high traffic, high security areas use ties that twist on the side.
Meets ASTM F 626-6.1.2 specifications as well as Federal Bureau of Prisons, Army Corps of Engineers, Federal Aviation Administration and state and local correctional facility specifications.
- High Quality Pre-Formed Steel Ties - 1.2 oz Galv. (9ga)
- Secure, Tamper-Proof Twist with Custom Power Drill Bit Tool
- Commercial, Industrial, Correctional & Military Applications
- Pre-shaped to fit around two sides of a diamond to create tighter fabric tension.
- A better bond between tie, fabric and post to reduce problems with electronic surveillance systems.
- Ends twisted opposite fabric, away from inmates.
- Won’t fall off before twisting.
- Don’t need to be trimmed, eliminating cleanup.
- Meets ASTM F 626-6.1.2 Specifications
Also Available by Special Order - Please Call for Quote
Shapes: Side Twist Tight, Mini Mesh Twist Tight, Welded Wire Twist Tight
Finishes: .4oz Aluminized Steel (9ga), Stainless Steel (9ga), Core (2-3/8” tubing or pipe with 3/8” x 5” rods)
Specifications
Specifications
Twist Tight Ties
The ties will be a preformed steel wire ties. It shall be preformed in the shape designed to fit around the post or rail, and over at least two sides of a diamond of the chain link fabric. The two ends shall come together and are long enough to be power twisted with a tool. The twist shall be at least three full twists equivalent to one and one half machine turns, drawing the chain link fabric tightly to the post or rail thereby increasing the effectiveness of perimeter security detection devices through reduction of false alarms due to environmental causes.
The twisted ends shall lay opposite of the fabric side away from human contact to reduce the possibility of untwisting the tie.
If contact is unavoidable on the twisted side, the protruding “tail” shall be bent down to the pipe to prevent injury. Or the tie design for side application may be used as an alternative in lower security applications that allow contact with the “tail” (or termination point of the tie).
No less than a nine gauge wire should be used with a 1.8 ounce galvanized coating or 1.2 ounce if the chain link mesh is 1.2 ounce, or .04 ounce aluminized.
Tie should meet ASTM F 626-96a (2003) 6.1.2.1. Power Fastened Round Wire Ties.
| Size | Qty/Box | LBS/Box |
|---|---|---|
| 1-5/8" | 500 | 26 |
| 2" | 500 | 28 |
| 2-1/2" | 500 | 34 |
| 3" | 500 | 38 |
| 3-1/2" | 500 | 44 |
| 4" | 500 | 48 |
| 4-1/2" | 500 | 74 |
Instructions
Instructions
Reviews
Reviews
Average Customer Rating:
(2 Reviews)
Write a Review (requires login)
Spot on!
Shipping and handling seems a bit pricey, but the product and speed of delivery are spot on.
Fast Delivery
Fast Delivery, Great Customer Service. THANKS
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
Parts for this product
You May Also Like
