1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
This adjustable hinge provides versatility and facilitates the mounting of ornamental gates to posts that are 4" square or greater, columns, or walls. Hardware allowances are key to having a professional installation and the adjustability from 3.25" (3-1/4") to 6.50" (6-1/2") will allow for a perfect fitting latch. Hinge uses an aluminum block designed for welding to a 2" aluminum profile but can also be through bolted or pre-drilled with two holes per side and attached with SS screws. The versatility and adjustment comes from the combination of unique 4" square mounting plate and stainless steel adjustable hinge pin. The Acetal bushing, which is prized for its strength, low friction coefficient, and low moisture absorption, will provide smooth gate operation for years to come. Hinges perfect for use on automated or manual driveway gates.
Adjustable Surface Mounting Hinges are designed for use with Ornamental Aluminum gates.
Adjustable Surface Mounting Hinge Features:
Note - Order two or more per gate leaf depending on application
Installation Notes:
The tools required to mount to the post are a drill and drill bits, wrenches, and SS fasteners. Hinges can be installed with one person but it is suggested to have a helper. Blocks of 1x4 and 2x4 lumber are useful to shim under the gate and hold to height. Space the hinges on the post, wall, or column for aesthetics and attach. Please note that a hole needs drilled in the post, column, or wall to allow adjustment of the hinge pin. Adjust the gate panel to the proper height and affix the hinge block and bushing to the hinge pin. Make final adjustments and the installation is complete.
There are no reviews yet. Be the first to Write a Review (requires login).
