1-800-355-2335 |
Mon-Fri: 7:30am - 4pm EST |
Contact Us
Snug Cottage Hardware 3/8" x 6-1/2" Carriage Bolts with Nuts and Washers for Wood (5 per pack)
Item # FP-8256
Details
Details
3/8" x 6-1/2" Carriage Bolts with Nuts and Washers for Wood (5 per pack)
This 5-Pack of carriage bolts, with nuts and washers, is intended for use with the 8256 Mounting Plate, and the optional Back Plate, when through bolting to a 6" square post. You will need one 5-Pack per Mounting Plate.
Each Package Contains:
- (5) 3/8" x 6-1/2" Carriage Bolts
- (5) 3/8" Nuts
- (5) 3/8" Washers
Ordering Notes:
If your post is a size other than 6"sq., then you will need to purchase 3/8" carriage bolts that are 1" greater than the length of the post. If you are also installing the optional 8256 Back Plate, then your carriage bolt length will need to be 1-1/2" greater than the length of the post.
Instructions
Instructions
- It is best to drill through the post half-way, from both sides, to ensure perfect alignment. It is hard to drill straight through a 6" sq. post, so we recommend marking the position on both sides of the post and drilling only half-way through from each side. The hole from the second side will find the first, making the installation clean and tidy.
- Touch-up paint may be required for the bolt heads.
Customer Photos
Customer Photos
Customer Photos - Cape Cod Board Gates Using Snug Cottage Hardware - Hephzibah, GA
Here is a series of photos from our customer down in Hephzibah, GA, of a set of very nice Cape Cod Board Gates, built using our free DIY wood gate plans, and hung using our high quality Snug Cottage Gate Hardware.
Dayna hung the gate using the 8324 Series Rear Eye Heavy Duty Strap Hinges (8324-182 & 8324-052), 8256-342 Mounting Plate with 8" Pin, FP-8256-G Carriage Bolts, and 8256-BP022 Hinge Back Plates. For the fence, they built a 2-rail board fence that is backed with welded wire steel fencing. The project looks great Dayna!
Customer Photo - Custom Wood Gate Install using Snug Cottage Gate Hardware - Miami, FL
Here is a great picture from a customer of ours down in Miami, FL that used Snug Cottage Hardware to build and install this homemade gate. Ana chose to use the 18" Heavy Duty Double Strap Hinges, Rear Eye (8325-182), Mounting Plate with 8" Adjustable Hinge (8256-342), and 6-1/2" Carriage Bolts, Nuts and Washers (FP-8256-G). The extra wide double strap hinges fit gates that are 3-1/2" thick which is perfect for building gates using 5/4" boards. The gate looks great and we are pleased to hear how well the hardware worked out for you! Keep up the great work!
Customer Feedback:
"Hello George!
The finished product attached. Great product, smooth and sturdy.
Thank you and wishing everyone at Hoover Fence a very happy holiday season.
Reviews
Reviews
Average Customer Rating:
(5 Reviews)
Write a Review (requires login)
The rep was very helpful in getting the.. 
Reviewer:
A viewer
from ID
The rep was very helpful in getting the correct hardware for my project. The quality of the hardware is excellent. The only disappointment was the carriage bolts sent were the wrong size. I was able to use the for another part of the project, so all was well.
Exceeded expectations 
Reviewer:
A viewer
from Oregon
The heavy duty hinges and hardware far exceeded my expectations. Stout. Solid, Built to last.
Made my own gates per the free plans..
Reviewer:
A viewer
from Nebraska
Made my own gates per the free plans and ordered all the hardware. Very pleased...easy to follow
Great stuff...minor nitpick
Reviewer:
A viewer
from Massachusetts
Love you guys....great gear for custom fence work, and good customer support, but this time Snug Cottage messed up an order. To be fair, they did a great job of straightening it out before I'd gotten the hardware out of the box, but I did have to modify a design to accommodate the fix. It's a nit pick, I'd give you a 4.9 if I could since the quality is superior to anything else available on the market.
Easy to use site
Reviewer:
A viewer
from Illinois
Easy to use site, excellent products and very fast processing and delivery.
1-5 of 5
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
Parts for this product
-
$35.28 - $54.60Snug Cottage HardwareMounting Plates with 6" Adjustable Pins for Wood Gates#8256-PView More -
$4.83 - $14.70Snug Cottage HardwareCarriage Bolts with Nuts and Washers for Wood (2 per pack)#FP-CB-PView More
You May Also Like
$81.48 - $714.00
Snug Cottage Hardware2" x 5/16" Lag Bolts for Wood - Galvanized
#FP-LB-G-P
View More
$92.19 - $829.50
Snug Cottage Hardware2" x 5/16" Stainless Steel Lag Bolts for Wood - Black
#FP-LB-SS-P
View More
$18.90 - $377.37
Snug Cottage HardwareBlack Stainless Wood Screws - Phillips Drive
#FP-WS-SS-P
View More
