Snug Cottage Hardware Back Plates for Threaded Adjustable Pins
Item # 8256-BP
Details
Details
Optional Back Plates for Adjustable Hinge Mount with 6" Threaded Pin (#8256-BP)
Optional Back Plates for Threaded Adjustable Pins (#8256-P) are both functional and decorative. A perfect match to the hole pattern and size of our Adjustable Hinge Mounts with 6” Threaded Pin (#8256-P), providing a matching esthetic on the back side of your gate installation, while increasing their holding power by acting as a large washer when you through-bolt.
Optional Back Plate (8256-BP) Features:- Intended for use on wood and cellular PVC applications.
- Back Plate is approximately 10"H x 2"W.
- The mounting holes are sized for 3/8" carriage bolts or lag screws (sold separately)
- Sold individually.
- Manufactured from stamped steel.
- Available in Hot Dipped Galvanized or Black (BPPCG) finishes.
- Fasteners not included.
Ordering Notes:
Used only as a back plate for the #8256-P Adjustable Hinge Mounts with 6” Threaded Pins, which are sold alone or as part of some of our hinge sets (#8324-S, #8325-S and #8305-S). The back plates are sold individually, so if you matching up to one of the sets, please remember to order two.
If you are using the optional 8256 Back Plates with the #8256-P Hinge Mount, then your carriage bolts need to be 1-1/2" greater than the length of your post.
Specifications
Specifications
| SKU | Finish | Weight Each |
|---|---|---|
| 8256-BP02P | Black | 1.0 lbs. |
| 8256-BP022 | Galvanized | 1.0 lbs. |
Weights shown are approximate.
Instructions
Instructions
- It is best to drill through the post half-way, from both sides, to ensure perfect alignment. It is hard to drill straight through a 6" sq. post, so we recommend marking the position on both sides of the post and drilling only half-way through from each side. The hole from the second side will find the first, making the installation clean and tidy.
- Touch-up paint may be required for the bolt heads.
Customer Photos
Customer Photos
Here are some great pictures from our customer Abel down in Deer Park, Texas, of a very heavy duty gate he built and attached to his dog-ear wood fence, installed on 4x4 steel posts. He used our Snug Cottage wood gate hardware to install this gate, to provide a very secure installation.
The gate is hung using three 18" Heavy Duty Galvanized Cranked Band Hinges (8305-182) paired with Back Plates (8305-BP182), attached to Mounting Plates with 8" Adjustable Pins (8256-342), also using Backing Plates (8256-BP022). Note how the top pin faces down, which keeps the gate from being lifted off the hinges. To latch the gate, Abel used our 15" Slide Bolt (5002-L152). For added security, and to relieve stress on the latch, Abel also installed two stainless steel gate stops (1400-316).
Here is a series of photos from our customer down in Hephzibah, GA, of a set of very nice Cape Cod Board Gates, built using our free DIY wood gate plans, and hung using our high quality Snug Cottage Gate Hardware.
Dayna hung the gate using the 8324 Series Rear Eye Heavy Duty Strap Hinges (8324-182 & 8324-052), 8256-342 Mounting Plate with 8" Pin, FP-8256-G Carriage Bolts, and 8256-BP022 Hinge Back Plates. For the fence, they built a 2-rail board fence that is backed with welded wire steel fencing. The project looks great Dayna!
Reviews
Reviews
Average Customer Rating:
(8 Reviews)
Write a Review (requires login)
Exceeded expectations
The heavy duty hinges and hardware far exceeded my expectations. Stout. Solid, Built to last.
Great products just as advertised
Great products just as advertised excellent customer service would highly recommend
Great products excellent customer..
Great products excellent customer service Ive been a repeat customer and hope to do business in the future thank you
Easy to use site
Easy to use site, excellent products and very fast processing and delivery.
My experience with Hoover Fence was
excellent!
My experience with Hoover Fence was great. They had some very hard to find unique gate hinges that allowed me to mount a chain link gate to a wooden fence post. The communication from Hoover about my order was excellent, the product was shipped to Canada very quickly and upon receipt I found my items very well packaged. I will deal with Hoover again in the future for any fencing/gate needs.
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
-
$39.02 - $61.60Snug Cottage HardwareMounting Plates with 6" Adjustable Pins for Wood Gates#8256-PView More -
$10.44 - $22.20Snug Cottage Hardware3/8" x 6-1/2" Carriage Bolts with Nuts and Washers for Wood (5 per pack)#FP-8256View More
