Snug Cottage Hardware Twisted Ring Gate Latches for Wood Fence Gates
Item # 4149-WOOD
Details
Details
Twisted Ring Gate Latch – Flush Mount (4149-WOOD)
The Twisted Ring Latch is a design that endures! It has a long history of use in England and has been a top-selling latch for Snug Cottage Hardware since our inception.
This Twisted Ring Gate Latch is designed for use with Wood Gates and Doors. We also offer a version for Vinyl Gates (#4149-VINYL).
Twisted Ring Gate Latch – Flush Mount (4149-WOOD) Features:- Attractive!
- Intended for use on wood and cellular PVC single or double door configurations of gates, barn doors, garage doors, garden sheds, outdoor showers and carriage houses.
- Operates from Both Sides
- Easy to Install (Requires Single 3/4 Inch Round Hole)
- Flush Mounts
- Rosette measure 2-1/4" dia.
- Ring measures 3” across and is 1/2" diameter.
- Latching bar is 6" long.
- For Gates up to 5" Thick (A Longer 9/32 Keystock Can Be Used for Thicker Gates)
- Sold individually.
- Manufactured from a combination of stainless steel (bar, retainer and catch) and zinc/aluminum alloy (ring and rosette).
- Available in both Black Polyester Powder Coat and Hot Dipped Galvanized finishes.
- Color matched stainless steel fasteners included.
- Can be combined with Stainless Steel Padlock Eyes (#1300) if Locking is Required
- Can be combined with a Gate Stop (#1400) to prevent damage to the Gate and Latch due to excessive slamming or wind gusts.
- Black Twisted Ring Pull is Available on its Own for Decorative Use (#4149-RING)
- Versions also available for gates Set Back from front of the posts (#4152), Sliding Doors (#4151-0SP), and Natural Color Latch (#4149-062)
Specifications
Specifications
Twisted Ring Gate Latch - Specifications (PDF)
| SKU | Type | Finish | Weight Each |
|---|---|---|---|
| 4149-L6SP | Latch Only | Black | 2.0 lbs. |
| 4149-LESP | Latch w/ Padlock Eyes | Black | 2.0 lbs. |
| 4149-LDSP | Latch w/ Padlock Eyes & Gate Stop | Black | 3.0 lbs. |
Weights shown are approximate.
Instructions
Instructions
Twisted Ring Gate Latch - Installation Instructions (PDF)
Twisted Ring Gate Latch - Installation Details (PDF)
- Operates from both sides.
- Allows for either a left or right handed installation.
- Minimum mounting surface required is 3-1/2" wide x 4" tall.
- Easy to install, requiring only a single 3/4" round hole.
- Intended for use on gates up to 5" thick (with standard key stock provided).
Customer Photos
Customer Photos
Here are some beautiful pictures from our customer out in Monterey, California, of her backyard garden and fence which features a wooden arbor with gate, hung with our Snug Cottage Hardware. Katherine used our 8292-07SP Hinges and 4149-LDSP Twisted Ring Latch. The project looks great Katherine - Thank you so much for the pictures!
Here’s the photos of the finished gate you asked for. I’m happy with it. You and everyone else I spoke with at Snug Cottage and Hoover Fence were so great to work with. You all are top notch and I want to thank you again for all your help with the speedy delivery, answers to my questions, and your kind and professional attitude. - Joe M.
Reviews
Reviews
Average Customer Rating:
(12 Reviews)
Write a Review (requires login)
Hardware is good, screws are inferior... replaced them. 
Pleased with the overall quality of the hardware, except for the screws. Supplied with Phillips head screws, be sure to pre-drill. If using an electric drill, turn down low and increase torque only when needed. Even then a couple stripped out their heads and a couple snapped off. Replaced all the screws with exterior torx screws and had no further issues.
I did not have drive all over town
I did not have drive all over town hoping to find the part. Hoover Fence made it easy.
Good quality Taiwanese product
Good quality Taiwanese product. Clear instructions and fast delivery
Excellent quality products & customer..
Excellent quality products & customer service! I would definitely buy again & recommend.
Fast response and fair prices
Fast response and fair prices
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
Parts for this product
You May Also Like
