Chain Link Post Anchor - Spade Type

Save time and money by using these chain link fence post anchors in lieu of concreting all posts! Simply drive posts in plumb using a fence post driver and torpedo level. Anchors simply slide over top of post and get positioned at base of post, position parallel to fence line. Drive anchor slightly below ground surface with a small 1-2 lb. sledge hammer or spud bar. It is still recommended that your 'pull' posts such as end, corner, and gate posts are cemented in place. Spade-type fence post anchors help prevent fences from leaning and are also easier to remove if a fence must be removed. Consider also our Oz-Post fence post anchoring system.