Hoover Fence Commercial Chain Link Fence Double Gates, All 1-5/8" Galvanized HF20 Frame

Actual Double gate widths are approx. 9" less than the width shown. This allows space for our standard hinges and drop rod assembly (not included).

Example: a 10' (120") wide double gate's leaf actually measures approximately 55-1/2" wide each.

If you are using your hinges, set the posts after the gate arrives by pre-mounting the hinges and latch to guarantee a proper fit. This is always a good idea anyway. TIP: Set the gate hinge post first, install the gate complete with latch and set the latch post last. This GUARANTEES a good fit. We can custom build to fit your opening between posts, or other fixed structures, i.e. walls, and/or columns.

If you are replacing an existing gate, you must measure the gate opening size and make sure gate posts are plumb. Measure across the opening at a height where you intend to mount the latch. Provide us with the 'inside-to-inside' measurement. Provide us with the gate opening size and we will make the gate fit using our hinges and latch. It would also be wise to measure the actual height of the gate, in the case that our standard 2 inch space under the gate does not meet your needs. Please provide a drawing with all pertinent measurements at the time of your order.