D&D Technologies SureClose ConcealFit Hydraulic Closer/Hinge System for Gates and Doors

SureClose ConcealFit Hydraulic Closer/Hinge System for Gates and Doors (77108523 & 78108513)

SureClose® ConcealFit Gate Closer & Hinge Sets are designed to replace conventional, bulky commercial gate hinges and closers. These high-quality, hydraulic hinge-closer units provide a concealed finish, a highly adjustable self-closing function and burglary and vandalism resistance. When closed, the SureClose® ConcealFit system cannot be seen or tampered with. Superb engineering and patented design allow total concealment of the hinge-closer unit in a remarkably small housing.

SureClose® ConcealFit features ‘Final Snap-Close Action’, which increases speed at the end of closing to ensure latching and to overcome electric or coded locks. Soft, quiet closure protects the gate’s latching/locking system. 'Closing Speed', 'Final Snap-Close' and ‘Backcheck' are adjustable using a simple Allen key. The hinge-closer is easily adjustable in three dimensions (horizontal, vertical and in/out) for fine positioning and speedy gate alignment. Gate gaps can be as low as 5/64", which means no exposed parts to serve as a climbing foothold, thereby increasing security.

This hinge-closer set also features UL10C fire-rating, and is tested to ADA and ANSI/BHMI Standards. Designed to never leak hydraulic fluid, the SureClose® ConcealFit technology is extremely safe and will not present resistance if closed quickly in an emergency. SureClose® ConcealFit is suitable for pool and safety gates*. With NO hold-open feature, it opens to, and self-closes from, 125°. Weld boxes for aluminum or steel gates, and routing templates for wood gates, are sold separately. All SureClose® ConcealFit housings are made of high-grade aluminum.

• Hydraulic Gate/Door Closer/Hinge System
• ConcealFit Kit (#77108523) includes one Hinge/Closer and one Hinge Only
• Hinge Only (#78108513) is also available individually
• Hydraulically operated hinge and gate closer set
• Clean openings for an elegant, distinctive and timeless look
• Closer and hinge solution for bullet-resistant and safe room doors
• Can be used on both left and right-handed swinging gates/doors
• Suitable for internal and external use
• Concealed mechanisms provide unparalleled security
• Secure, safe and quiet operation
• No exposed parts for use as a climbing foothold
• Gate gap as low as 5/64” (2mm)
• Easily installed internally within the gate and post
• Easily accessed, adjustable closing-speed valves
• Adjustable closing speed, latching speed and backcheck
• 4 positional adjustments: lateral, vertical, depth and inclination to ensure perfect installation
• Watch video demonstrating adjustment capabilities
• The innovative choice of Architects and Designers
• Independently tested to over 500,000 open/close cycles
• 20-minute UL10C and cUL10C fire rating
• Suitable for ADA use
• Aluminum and steel gates require a weld box
• CAUTION: A GATE-STOP is required to prevent a gate opening beyond 125° (see fitting instructions). Forcing a gate beyond a 125° opening may damage closer and void Warranty.
• Maximum Gate/Door Weight: 220 lb (100 kg)
• Maximum Gate/Door Width: 48" (1220mm)
• Maximum Opening Angle: Approx 125°:
• Final Snap-Close Action: 12° - 0°
• Min Post Size: 2"+ (50mm)
• Ideal Gate Gap: Adjustable from 5/64" (2mm) - 1/4" (6mm)
• Fixing Method: Screw-On
• Color/Finish: Black Anodised