
The EMX LRS Logic Interface provides extended detection range, A/B directional logic and more when paired with the LRS-C1 Control Unit and Magnetoresistive Sensor. This unit is needed for large opening applications that require two or more sensors.
Note: Required LRS-C1 Control Unit Sold Separately.
LRS Logic Interface Specifications (PDF)
| Power Indicator | Green LED |
| Detect Indicator | 2x Red LEDs |
| Configuration Selector | 10 Position Rotary Switch |
| Outputs | Relay 1: SPDT (Form C) Relay 2: SPDT (Form A) |
| Operating Environment | -40°F to 180°F (-40°C to 82°C) 0 to 95% Relative Humidity |
| Housing Material | ABS |
| Enclosure | IP30 |
| Power | 12-30 VDC and 24 VAC |
| Operating Current (Standby/Detect) |
One Sensor Connected: 22/35mA Two Sensors Connected: 33/60mA |
| Supply Protection Circuitry | Reverse polarity and fuse protected |
| Dimensions | 2.9" (73mm) x 1.2" (38mm) x 3.1" (78mm) |
| Weight | 0.25 lbs. (113g) |
| Connector | 11 pin male connector (JEDEC B11-88) |
There are no reviews yet. Be the first to Write a Review (requires login).