Snug Cottage Hardware Heavy Duty Double Strap Hinges for 3-1/2" Thick Wood Gates - Rear Eye, Each
Item # 8325-P
Details
Details
Double Straps with Rear Eye - 3-1/2" Gap (8325)
Our Rear Eye Double Strap Hinges are incredibly robust and durable! They combine heavy duty construction and strength with easy adjustment while reducing the space required between the gate and post to as little as 1/2". They are ideal for use on heavy gates such as rail gates, driveway entrance gates, dumpster enclosure gates, agricultural gates and the traditional English ‘Five Bar Gate’.
Double Straps not only hang the gate, they strengthen and support the gate. By sandwiching the lumber between the straps the corner of the gate is effectively locked at 90 degrees to prevent sagging and distortion. Strong, Full Lateral Adjustment and only 1/2" between the Gate and the Post. This Hardware Combination has it all!
This hardware is ideal for use with wood gates.
Double Straps with Rear Eye - 3-1/2" Gap (8325) Features:- Extremely heavy duty!
- Intended for use on large, heavy gates constructed using wood or cellular PVC.
- Available in 5", 12", 18" or 24" lengths.
- Straps are 2" wide x 1/4" thick.
- 3.5" space between straps.
- 3/4" eye to fit our 3/4" pin selection (Sold Separately).
- Sold individually.
- Manufactured from forged steel.
- Available in Hot Dipped Galvanized or Black (BPPCG) finishes.
- Color matched carriage bolts included.
- Double Straps Sandwich the Wood Between the Straps to Lock the Gate at 90 Degrees to Prevent Sagging and Distortion.
- The "Rear Eye" Double Strap enables one to hang large, heavy Gates with a space between the Gate and the Post as little as one-half inch. Ideal for use with more ornate sleeved Posts. Depending on the thickness of the Post the Gate can be mounted even with the front of the Post or slightly in front of the front edge of the Post. Gate can be opened about 135 Degrees.
- A Long Double Strap is Usually Used on the Top Rail of the Gate (12" For Gates up to 4' Wide, 18" For Gates up to 7' Wide, and 24" For Gates up to 10' Wide).
- The 5" Double Strap can be Used on the Bottom of All Sizes of Gates.
- Gates Over Six Feet High Should Have a Third Hinge.
- Also available for 3" Thick Wood Gates (#8324)
- We also carry Heavy Duty Single Strap Hinges (#8307).
Free DIY Wood Gate Plans
Specifications
Specifications
8325 5" Heavy Duty Rear Eye Double Strap Hinge - Specifications (PDF)
8325 12" Heavy Duty Rear Eye Double Strap Hinge - Specifications (PDF)
8325 18" Heavy Duty Rear Eye Double Strap Hinge - Specifications (PDF)
8325 24" Heavy Duty Rear Eye Double Strap Hinge - Specifications (PDF)
| SKU | Length | Width* | Eye Size | Finish | Weight Each | For Gates Up To |
|---|---|---|---|---|---|---|
| 8325-05SP | 5" | 3-1/2" | 3/4" | Black | 3.0 lbs. | ** |
| 8325-052 | 5" | 3-1/2" | 3/4" | Galvanized | 3.0 lbs. | ** |
| 8325-12SP | 12" | 3-1/2" | 3/4" | Black | 6.0 lbs. | 4' Wide |
| 8325-122 | 12" | 3-1/2" | 3/4" | Galvanized | 5.0 lbs. | 4' Wide |
| 8325-18SP | 18" | 3-1/2" | 3/4" | Black | 7.0 lbs. | 7' Wide |
| 8325-182 | 18" | 3-1/2" | 3/4" | Galvanized | 7.0 lbs. | 7' Wide |
| 8325-24SP | 24" | 3-1/2" | 3/4" | Black | 9.0 lbs. | 10' Wide |
| 8325-242 | 24" | 3-1/2" | 3/4" | Galvanized | 8.0 lbs. | 10' Wide |
*Width measurement is the distance between straps.
**5" Strap can be used on bottom with 12", 18", or 24" Straps
Weights shown are approximate.
Instructions
Instructions
8325 Heavy Duty Rear Eye Double Strap Hinge - Instructions (PDF)
- Ideally used for heavy gates, such as rail gates, driveway entrance gates, dumpster enclosure gates, agricultural gates and the traditional English 'Five Bar Gate'.
- As little as a 1/2" space is required between the gate and post.
- Double strap hinges sandwich the gate between the straps, virtually locking the corner square at 90 degrees. This helps to prevent the gate from sagging.
Gate Installation Configurations
Hung Between the Posts
Typical Installation with #8800 Pins. Gap between Post and Gate can be as little as 0.5 inches.
Hung Behind the Posts
Typical Installation with #8256 Mounting Plate and Pins. Gap between Post and Gate can be as little as 0.5 inches.
Customer Photos
Customer Photos
Here are some great pictures from a customer of ours down in Savannah, Georgia of a contemporary wood gate installation. We are pleased that Ernest chose to use our hardware to hang this gate and finish off this beautiful project. Ernest chose to use a combination of 12" (Top) and 5" (Bottom) 8325 Heavy Duty Double Strap Hinges mounted to 8256-34P Mounting Plates with 8" Adjustable Pin. He also used our FP-8256-B Hardware Kits. The gate is secured using the Snug Cottage 6159-B316 Suffolk Gate latch. All of this high quality Snug Cottage Gate Hardware, along with Ernie's craftsmanship, created this heavy duty and reliable wood gate that swings easily and locks securely.
Customer Feedback:
"George. Happy New Year. As I mentioned earlier, I am terrifically impressed with the quality of your hardware, but still reeling from the cost. Nevertheless, I love the results and my gates swing wide open with a light nudge. Hope these photos will inspire others. Your friend and new customer in Savannah, GA. Ernie T."
Thank you so much Eddie! We know that this hardware is more expensive than the 'competitions' but as you attest it is better than the rest. Keep up the great work and enjoy your new outdoor living space - you deserve it!
Here is a great picture from a customer of ours down in Miami, FL that used Snug Cottage Hardware to build and install this homemade gate. Ana chose to use the 18" Heavy Duty Double Strap Hinges, Rear Eye (8325-182), Mounting Plate with 8" Adjustable Hinge (8256-342), and 6-1/2" Carriage Bolts, Nuts and Washers (FP-8256-G). The extra wide double strap hinges fit gates that are 3-1/2" thick which is perfect for building gates using 5/4" boards. The gate looks great and we are pleased to hear how well the hardware worked out for you! Keep up the great work!
Customer Feedback:
"Hello George!
The finished product attached. Great product, smooth and sturdy.
Thank you and wishing everyone at Hoover Fence a very happy holiday season.
Reviews
Reviews
Average Customer Rating:
(5 Reviews)
Write a Review (requires login)
We loved the products we ordered from...
We loved the products we ordered from Hoover fence and their customer service was very helpful.
Excellent gate hardware for
Excellent gate hardware for agricultural field gates. I would not purchase from any other company!
Great hardware and my gates are rock
Great hardware and my gates are rock solid. Worth every penny.
These were the parts that I ordered
These were the parts that I ordered. Already put the items to use. Thanks
Was very pleased with Quality of..
Was very pleased with Quality of product and the timely matter in which I received it.
Shipping
Shipping
Shipping Expense Disclaimer: All orders are subject to confirmation. Additional shipping expenses, although rare, may apply due to weight, size, location, and/or other variables. Should your order require additional funds to cover the transportation of goods, you will be contacted prior to order processing for approval.
Parts for this product
-
$35.73 - $58.26Snug Cottage HardwareMounting Plates with 6" Adjustable Pins for Wood Gates#8256-PView More -
$116.72 - $267.70Snug Cottage HardwareHeavy Duty Rear Eye Double Strap Hinge Hardware Set - 3-1/2" Thick Gates#8325-SView More -
$13.92 - $52.90Snug Cottage Hardware3/4" Threaded Adjustable Pin Male Hinges for Wood Gates, Each#8801-PView More -
$22.97 - $46.48Snug Cottage HardwareGate Hangers on 4" Plates for Wood Gates, Each#8254-PView More -
$27.35 - $51.18Snug Cottage HardwareAdjustable Gate Hangers on 4" Plates for Wood Gates, Each#8255-PView More -
$22.72 - $25.24Snug Cottage HardwareGate Hanger for Masonry or Stone - Galvanized#8257-342View More -
$16.24 - $26.20Snug Cottage Hardware3/4" Pin to Screw Male Hinges for Wood Gates, Each#8308-PView More
You May Also Like
