Snug Cottage Hardware Contemporary Cranked Band Hinges for Wood Gates - 316 Stainless Steel, Pair

These hinges are ideal for use with wood gates.

• Pin Diameter: 1/2" (7", 12", and 16" Model), 5/8" (24" Model)
• Very Robust - Heavy Duty
• Contemporary Style
• Can Be Flush Mounted or Jamb Mounted
• Can be used mounted flush with front of post or ideal when the gate needs to be set back from the front of the post and still have a tight fit (as little as 1/8") between the gate and the post.
• Manufactured from Marine Grade 316 Stainless Steel
• Available in a Natural Satin 316 Stainless Steel Finish or with a Black Polyester Powder Coat Finish over 316 Stainless Steel
• If Installed with Both Pins Up then the Gate Can Be Removed Easily. Installing One Pin Down Prevents Removal of the Gate.
• Supplied with Stainless Steel 2 Inch #12 Wood Screws
• Sold in Pairs

Please Note: This style of hinge has a loose fit on the pin. This slackness will not be evident when both hinges are mounted.

Please Note: Hinges require that a Carriage Bolt (preferred) or Lag Bolt be utilized on each hinge as shown Here. These are not included with the Hinge pairs because the length of bolt required will vary with the installation. Requires 3/8" diameter bolts. You will need bolts 1" longer than the overall thickness of your gate or door.