|HOME | SLAT INDEX | PVC SLATS|
Non-winged PVC Slats for Chain Link Fences
Description: Slats slide in vertically between curvature created by woven chain link diamonds. This type leaves a small space between the slats, so the fence will not be totally solid. Air can flow through more readily than other types of slats. A horizontal locking strip is included, which installs through a pre-cut groove in each vertical slat. This locking strip holds the slats firmly in place. Available in wide range of colors. Difficulty in installation: Time consuming but not difficult.
|Prices and Ordering:
Slats come packaged in bags. Each bag covers approximately 10 linear feet. Example: 60 feet of fence would require approximately 6 bags.
These slats will fit 2" mesh chain link fabric (9 and 11 ga). These slats do not "weave"
into the chain link as many people think. They simply slide down into the diamonds from
the top in the natural curvature of the woven mesh. Two slats slide into each full
diamond. If you look down on the very top of the chain link to the ground, there is a
tunnel created by the twisted strands of chain link. The slats slide into that
"tunnel". The horizontal 'locking strip' locks the slats into place.
illustrates OptionLock slat installation.
Additional widths (1-3/4" and 2-1/4"), heights (3', 3-1/2', 9', 10',
11' and 12') and colors (sky blue, custom) are available by special order.
|COLOR / HEIGHT||4'||5'||6'||7'||8'|