1-800-355-2335 |
Mon-Fri: 8:30am - 5pm EST |
Contact Us
The Chesterfield w/Westminster Accent style is a solid vinyl fence using 7/8" thick x 7" wide vinyl vertical "boards". The boards are hollow 100% extruded vinyl. These vinyl "boards" are tongue and grooved on the edges so one board fits into the next. This is the safest and best way to assure a no-gap appearance over the years. The bottom rail has a steel reinforcing rail that fits inside the vinyl rail. The top and bottom rails are the new 2"x 6" deco rail designed to add a more appealing profile and for easier installation. Topped with an attractive square lattice accent, the Chesterfield w/Westminster Accent comes in a 6' height (white only) consisting of 4-1/2' of fence and 1-1/2' of accent. Shown with New England caps, other caps are available. It also meets the Boca Pool Code. Sections are capable of raking out of square to follow grades. Sections include rails and pickets. Posts and post caps sold separately.
Note:The top accent rail of this style changed from 3x3 to 2x3.5 in 2009. The posts, pickets, and the channels around the lattice panel also changed at this time. This style will no longer match the Chesterfield with Westminster Accent style purchased before 2009.
Classic Curved Rails: "Classic Curved Deco Rails" are featured on most tongue and groove privacy fence styles. These rails have the distinctive look of decorative crown molding. The larger molding offers a sharp detail and classic styling that cannot be found in any other privacy rail on the market. Note: Some existing pictures on our site may show the old style rails that have been changed. The old style rails may be available as replacements to existing fence until the supply is exhausted. (more information on "classic curve deco rails")
Matching Gates available.
Bufftech WindZone Performance - Miami-Dade NOA Code Approval (PDF)
Section Width: 8'
Heights: 6' only
Picket Size: 7/8"x 7", tongue and groove
Picket Spacing: none
Rails: accent 2"x 3-1/2", top/bottom 2"x 6", ribbed
Steel Rail Channel: bottom
Post Size: 5"x 5"
Top Accent Rail (A): 2" x 3-1/2" x 94-1/2"
Lattice Panel (B): 1 Piece of 13" x 90-3/4"
Horizontal Channel (C): 2 Pieces 5/8" x 1" x 90-3/4"
Vertical Channel (D): 2 Pieces 5/8" x 1" x 13-1/8"
Top Rail (E): 2" x 6" x 95" Classic Curve Deco Rail Ribbed, extruded with channel to accept fence pickets
Pickets (F): 13 pieces of 7/8" x 7" x 45-3/4"
End Channel (G): Included
Bottom Rail (H): 2" x 6" x 95" Classic Curve Deco Rail Ribbed, extruded with channel to accept pickets. Includes steel channel.
Post (in-ground) ( I ): 5" x 5" x 107" heavy wall
Lattice Spacing: 2"
Picket Spacing: None
Post Spacing (center to center): 97"
Steel reinforcement: Yes-channel located in bottom rail
Aluminum reinforcement: None
Color(s): White only
Bufftech Catalog (PDF)
Bufftech Product Catalog (PDF)
Why choose Bufftech over other vinyl fence? (PDF)
Why choose vinyl over aluminum? (PDF)
Bufftech Top 10 Reasons (PDF)
Bufftech Quick Reference Guide (PDF)
Bufftech Consumer Guide (PDF)
Average Customer Rating:
(1 Review)
Write a Review (requires login)
Great communication, shipped on time. Although the box that had the upright vinyl fence pieces was falling apart, and a few pieces were hanging out by the time it arrived, everything was still in good condition. The longer box with the horizontal pieces arrived in good shape. Perhaps a stronger box would hold up better during shipping. I'm sure they get bounced around a lot during their travels. In the end everything worked out well. Will buy from them again.
